D Configuration Worksheet For The Bcc Drivers For Identity Manager; Cluster1 To Cluster2; D.1 Cluster1 To Cluster2 - Novell BUSINESS CONTINUITY CLUSTERING 1.2 - ADMINISTRATION Administration Manual

Configuration Worksheet for the
D
BCC Drivers for Identity Manager
Use this worksheet to gather the information you need to configure the Novell
Clustering 1.2 drivers for Identity Manager. Repeat this process for each connection between
clusters. For information about how to set up the drivers, see
Manager Drivers for BCC," on page
Section D.1, "Cluster1 to Cluster2," on page 143
Section D.2, "Cluster2 to Cluster1," on page 145

D.1 Cluster1 to Cluster2

First, create a driver instance on the Identity Manager node for the first cluster in order to
synchronize information from the first cluster to the second cluster.
Clusters for This Driver Instance
Clusters Synchronized by This Driver Instance
Name of the source cluster
Example: cluster1
Name of the destination cluster
Example: cluster2
New Driver Set for the Source Cluster
Driver Set Information
Name of the BCC driver set for the source cluster
Example: Cluster1 BCC Driver Set
Context that contains the source cluster
Example: cluster1.clusters.siteA.example
TIP: Browse to select the context.
Distinguished name of the Identity Manager node in
the source cluster
Example: cl1svr1.cluster1.clusters.siteA.example
TIP: Browse to select the server.
Chapter 8, "Configuring the Identity
67.
Value
Value
Configuration Worksheet for the BCC Drivers for Identity Manager
®
Business Continuity
D
143