To view or modify your current adapter settings:
1 (Access Gateway Appliance) In the Administration Console, click Devices > Access Gateways
> Edit > Adapter List.
2 (Conditional) If the Access Gateway is a member of a cluster, select the server you want to
configure from the list of servers in the Cluster Member field. All changes made to this page
apply to the selected server.
3 Select the adapter you want to modify, then select one of the following actions:
To add a new subnet to an existing adapter, click New.
To delete a subnet, select a subnet, then click Delete. More than one subnet must be
configured for you to delete one.
To modify an existing subnet, click the IP address of the subnet.
4 To configure a new subnet or a new IP address for a subnet, configure the following fields:
Subnet: Displays the address of the subnet that you are modifying. This is empty if you are
creating a new subnet.
Subnet Mask: (Required) Specifies the subnet mask address for this subnet. The address can
be specified in standard dotted format or in CIDR format.
98
Novell Access Manager 3.1 SP2 Access Gateway Guide
Need help?
Do you have a question about the ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 and is the answer not in the manual?