Advanced Access Gateway Service Options; Section 5.7, "Advanced Access Gateway Service Options - Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual

5.7 Advanced Access Gateway Service Options

The following settings apply to all reverse proxies, unless the option is overwritten by an advance
proxy service setting (see
Service," on page
1 In the Administration Console, click Devices > Access Gateways > Edit > Advanced Options.
2 To activate these options, remove the #symbol, configure the value, save your changes, then
update the Access Gateway.
#NAGGlobalOptions FlushUserCache=on: Specifies whether cached credential data of the
user is updated when the session expires or the user changes an expiring password.
When it is turned on, which is the default setting, credentials and the Identity Injection
data are refreshed.
When it is turned off, the cached user data can become stale. For example, if your
password management service is a protected resource of the Access Gateway and this
option is turned off, every time a user changes an expiring password, the user's data is not
flushed and the Access Gateway continues to use stale data for that user.
#NAGGlobalOptions DebugHeaders=on: When this option is enabled, an X-Mag header is
added with debug information. The information can be seen in sniffer traces and with plug-ins
such as ieHTTPHeaders, Live HTTP Headers, and FireBug. This option should only be enabled
when you are working with Novell Support and they instruct you to enable the option.
#NAGGlobalOptions DebugFormFill=on: When this option is enabled, additional debug
information related to the processing of a Form Fill policy is added to the Apache
file. The Form Fill entries generated by this option begin with a
#NAGGlobalOptions NoURLNormalize=on: When this option is enabled, it disables the
URL normalization protection for back-end Web servers. This option resolves issues in serving
Web content from Web servers that have double-byte characters such as Japanese language
characters.
#NAGAdditionalRewriterScheme=webcal://: When this option is enabled, the rewriter
rewrites URLs that have a scheme of
rewrites URLs with a scheme of
3 To disable an option, add the pound (#) symbol in front of the option, save your changes, then
update the Access Gateway.
180 Novell Access Manager 3.1 SP2 Access Gateway Guide
Section 1.1.3, "Configuring Advanced Options for a Domain-Based Proxy
21).
webcal://
http://
FF:
. The default rewriter configuration only
or .
https://
error_log
marker.