Managing Entries In The Reverse Proxy List - Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual

6.3.1 Managing Entries in the Reverse Proxy List

1 In the Administration Console, click Devices > Access Gateways > Edit > Reverse Proxy /
Authentication.
2 In the Reverse Proxy List, select one of the following actions:
New: To create a new reverse proxy, click New. You are prompted to enter a display name
for the proxy. For configuration information, see
and Authentication," on page
Reverse proxy names and proxy service names must be unique to the Access Gateway.
Protected resource names need to be unique to the proxy service, but they don't need to be
unique to the Access Gateway.
Delete: To delete a reverse proxy, select the check box next to a specific reverse proxy,
then click Delete. To delete all reverse proxies, select the check box next to the Name
column, then click Delete.
Enable: To enable a reverse proxy, select the check box next to a specific reverse proxy,
then click Enable. To enable all reverse proxies, select the check box next to the Name
column, then click Enable.
Disable: To disable a reverse proxy, select the check box next to a specific reverse proxy,
then click Disable. To enable all reverse proxies, select the check box next to the Name
column, then click Disable.
3 To save your changes to browser cache, click OK.
4 To apply the changes, click the Access Gateways link, then click Update > OK.
194 Novell Access Manager 3.1 SP2 Access Gateway Guide
Section 1.1, "Managing Reverse Proxies
14.