Interpreting Log Messages - Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual

Level
LOG_ERR
LOG_WARNING
LOG_NOTICE
LOG_INFO
LOG_DEBUG
When you run the
LOG_NOTICE. You can change the log level to any level from LOG_EMERG to LOG_INFO.
5 To apply changes, enter the following command:
apply
6 To exit from the configuration mode, enter the following command:
exit
7 To exit from the nash shell, enter the following command:
exit

4.1.2 Interpreting Log Messages

The entries in the
<time-date-stamp> <hostname> : <AM#event-code> : <AMDEVICE#device-id> :
<AMAUTHID#auth-id> : <AMEVENTID#event-id> :<supplementary log entry data and
text>
A sample log message is given below:
Aug 3 14:35:41 c1h : AM#504503000: AMDEVICEID#ag-0BDF41AAC4CDCBE5 :
AMAUTHID#0: AMEVENTID#74: Process request 1 'www.lag-202.com' '/AGLogout'
[192.10.100.111:38091 -> 192.10.106.2:80]
The fifth and sixth digits in the
The following table list the numbers and the components which they denote.
Number
01
02
03
04
05
06
07
124 Novell Access Manager 3.1 SP2 Access Gateway Guide
Description
Sends warning messages about recoverable errors.
Sends warning messages.
Sends information about the status of a service to the service
configuration logs.
Sends informational messages such as requests sent to Web servers and
the results of authentication requests.
Sends debug messages.
/etc/init.d/novell-vmc start
file have the following format:
ics_dyn.log
<AMEVENTID#event-id>
Component
Multi-Homing component
Service Manager
Request Processing
Authentication
Authorization
Identity Injection
Form Fill
command, the default log level is set to
refer to the Access Gateway components.