Table of Contents
Advertisement
PowerSoft
Every object defined as a button is an object whose area allows, when left-
clicked, to browse the system, displaying a new page or the detail pages of a
particular instrument.
1.3.4.3
S
1.3.4.3.1
Selecting any object in the edit area, a red edge appears around it.
To move the selected object, it is to be dragged to the desired position.
During the dragging, only the red edge is visible; releasing the mouse
button, the synoptic is regenerated and the object is shown in the new
position.
To change the object properties, right-click on the object to display the
synoptic menu and select "Properties". A dialogue box appears where all
the properties can be edited or modified. Pressing "Apply" the
modifications are stored and the synoptic regenerated; pressing "cancel"
the dialogue box disappears without any modifications.
"Size" represents the coordinates (in pixel) of the object top left point and
the size (in pixel too) of the same object. "Link" is the synoptic page or the
instrument that is opened when the object is left clicked.
1.3.4.3.2
To add a new object, open the synoptic menu right clicking in the edit area
and select "Insert". A sub-menu, where all the possible objects are listed,
appears. The objects are listed in the "basic objects list. It is possible to
insert predefined groups of objects (e.g., an instrument with a line, an
PowerSoft – Instruction manual
YNOPTIC MODIFICATION
Modifying of a single object
Adding an object
17
Advertisement
Table of Contents
