Digi MIL-4511H User Manual page 10

Install Guide
3. Add the host name and address, and then save the file. For example, for a
MIL-4511H called alpha with an IP address 192.185.2.3 , add this line:
4. Edit BOOTP in the /etc directory containing the hostname of the MIL-4511H,
hardware type, hardware address, and the IP address. Format the entry:
<hostname of MIL-4511H>:ht=1:ha=<hardware address>:ip=<ip address>
For example, an entry named alpha , with a hardware address of 0040c8010203
and an IP address of 199.86.12.183 :
alpha:ht=1:ha=0040c8010203:ip=199.86.12.183:
5. Start the BOOTP daemon by typing the command /usr/etc/BOOTPd. The
MIL-4511H will broadcast BOOTP packets and will obtain a response from the
server and will use the IP address specified in /etc/BOOTP file.
To se t t h e I P Addre s s wi t h BOOT P o n a HP / UX syst em :
1. Login as root on the system and start SAM, the System Administration Tool,
by entering sam at the command line.
2. Use a text editor to open the /etc/hosts file and add the following line:
3. Use the following menu sequence in sam:
Networking--> Communications--> Device Connectivity-->
Boot Protocol--> Actions--> Add
4. In response to the program prompts, add the following information:
BOOTP Device Name: <specify the hostname of the MIL-4511H>
Internet address: <specify the IP address of the MIL-4511H>
Subnet address: <specify the subnet mask of the MIL-4511H>
Station address (hex): <specify the hardware address of the MIL-4511H>
Boot file name: <specify the full path of this file> (e.g.: /etc/BOOTPtab)
5. Answer the prompt for BOOTP Device Adapter Type by clicking first on
Ethernet and then click on Apply .
6. Exit out of SAM.
7. Start BOOTP.
The MIL-4511H will broadcast BOOTP packets and will obtain a response
from the server using the IP address specified in /etc/ BOOTPtab file.
Model: MIL-4511H
192.185.2.3 alpha
192.185.2.3 alpha
10