Default Configuration Settings - Cisco 3524XL - Catalyst Enterprise Edition Switch Hardware Installation Manual

Chapter 2 Installing and Starting Up the Switch

Default Configuration Settings

Table 2-1 Default Configuration Settings
Feature
Management
Switch IP address, subnet mask, and
default gateway
Cluster command status
Cluster name
1
CDP
2
ARP
Static address assignment
Network View
3
VLAN membership
Performance
Autonegotiation of duplex mode
Autonegotiation of port speeds
Flooding Control
Broadcast storm control
Flooding unknown unicast and multicast packets Enabled.
Network port
4
CGMP
Network Redundancy
Spanning Tree Protocol
Port grouping
78-6456-03
After you assign IP information, the switch can operate with the default
configuration settings shown in Table 2-1.
Default Setting
User-assigned values entered in the setup
program.
Enabled.
User-assigned value entered in the setup
program.
Enabled.
Enabled.
None assigned.
Always available.
All ports are static-access ports in VLAN 1.
Enabled.
Enabled.
Disabled.
Disabled.
Enabled.
Enabled.
None assigned.
Catalyst 3500 Series XL Hardware Installation Guide
Default Configuration Settings
2-29