Related Manuals for Haier HWO90S11EB3
Summary of Contents for Haier HWO90S11EB3
- Page 1 90cm Ovens HWO90S11EB3, HWO90S16TB3, HWO90S16TG3, HWO90S17TPB3, HWO90S17TPG3 INSTALLATION GUIDE NZ AU...
- Page 3 CONTENTS Safety and warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Components required .
- Page 5 SAFETY AND WARNINGS WARNING! Electric Shock Hazard Turn the oven off at the wall before replacing the oven lamp or before carrying out any work or maintenance on it. Failure to follow this advice may result in electrical shock or death. WARNING! Fire Hazard Failure to follow this advice may result in serious...
- Page 6 SAFETY AND WARNINGS WARNING! Hot Surface Hazard Accessible parts may become hot when in use. To avoid burns and scalds, be careful not to touch any hot part and keep children away. Use oven mitts or other protection when handling hot surfaces such as oven shelves or dishes.
- Page 7 SAFETY AND WARNINGS READ AND SAVE THIS GUIDE IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, injury to persons or damage when using the oven, follow the important safety instructions listed below. Read all the instructions before using the oven. Use the oven only for its intended purpose as described in these instructions.
- Page 8 SAFETY AND WARNINGS which ensures that the oven operates efficiently. Care should be taken not to rub, damage or move it. • Do not use oven cleaners, harsh/abrasive cleaning agents, waxes, or polishes. No commercial oven cleaner, oven liner, or protective coating of any kind should be used in or around any part of the oven. •...
- Page 9 COMPONENTS REQUIRED TOOLS Supplied Not supplied Screws (4) Powered driver Cross-head screwdriver...
- Page 10 PRODUCT DIMENSIONS Product dimensions Overall height of oven Overall width of oven Overall depth of oven Height of chassis Width of chassis Depth of chassis Depth of oven frame and control panel (distance between front of chassis and front of oven door)
- Page 11 CABINETRY DIMENSIONS SIDE PROUD INSTALL 16–18mm 20mm Electrical supply FLUSH INSTALL 16–18mm 20mm 2 .5mm Overall height of cabinetry Minimum inside height of cavity Overall width of cabinetry Minimum inside width of cabinetry Minimum inside depth of cabinetry Ventilation air vent Note: If installing a cooktop above the oven, ensure adequate clearance is provided for the cooktop as per the cooktop manufacturer's instructions.
- Page 12 CHECK CAVITY 1 . Measure cavity dimensions . Ensure all minimum specifications have been met . 2 . Ensure any cooktop ventilation requirements have been considered . entry...
- Page 13 CONNECT POWER This oven must be connected to the mains power supply only by a suitably qualified person. The mains lead must not be clamped, bent, trapped, or come into contact with hot parts of the appliance . This oven must be earthed . Before connecting the oven to the mains power supply, check that: The domestic wiring system is suitable for the power drawn by the oven (as specified on the rating plate)
- Page 14 FIT THE PRODUCT 1 . Lift the product into the cavity, align it with surrounding cabinetry and appliances . 2 . Using the product as a guide, pre- drill 4 x 3mm pilot holes . 3 . Secure the oven to the cavity using the 4 x #3 .5x25 screws provided .
- Page 15 INSTALLER CHECKLIST To be completed by the installer Ensure the oven is level and securely fitted to the cabinetry . Open the oven door slowly until it is fully open, and check there is adequate clearance between the bottom of the door and the lower trim . This is to ensure correct air circulation . Should the lower trim become damaged, straighten the trim and ensure the oven door opens fully without obstruction .
- Page 16 WWW .HAIER .COM .AU 432722A 04.25 WWW .HAIER .CO .NZ...
Need help?
Do you have a question about the HWO90S11EB3 and is the answer not in the manual?
Questions and answers