Advertisement
Quick Links
Table of Contents
Introduction
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Additional Information Sources
Safety
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts List
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resources Required
Conversion
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Extending the Awning and Setting the Pitch
Retracting the Awning
Troubleshooting:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting Pitch Arm Fasteners
Maintenance
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fabric Care
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
lippert.com
432-LIPPERT (432-547-7378)
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
Solera
Universal Hardware
®
Manual Awning to
Solera 12V Power Awning
(For Aftermarket Applications)
Universal
Awning
Hardware Kit
Manual to
Solera 1500
Series Hybrid
(For Aftermarket Applications)
2
2
2
2
3
3
3
3
11
11
13
14
14
15
15
15
1
CCD-0001269
Rev. 09.20.24
Advertisement
Related Manuals for Lippert Solera Hybrid 1500
Summary of Contents for Lippert Solera Hybrid 1500
- Page 1 ..........lippert.com 432-LIPPERT (432-547-7378) Rev. 09.20.24...
- Page 2 DIY upgrade from a manual awning. WHICH COULD CAUSE THE AWNING TO MOVE UNPREDICTABLY, BECOME UNSTABLE, AND BEND NOTE: The Lippert Solera® Universal Hardware kit for a OR COLLAPSE CAUSING DEATH OR PERSONAL manual to hybrid conversion will ONLY fit Dometic and INJURY OR PROPERTY DAMAGE.
- Page 3 • Cordless or Electric Drill or Screw Gun • Appropriate Drive and Drill Bits • Socket Wrench • ” Socket • Rivet Gun • Locking Pliers • Ladder • Silicone Sealant Fig.1 • Non-permanent Method of Marking lippert.com 432-LIPPERT (432-547-7378) Rev. 09.20.24 CCD-0001269...
- Page 4 NOTE: Padding the locking pliers will prevent the scratching of components. THE SPRING IS UNDER EXTREME TENSION. IMPROPER HANDLING COULD CAUSE DEATH, SERIOUS INJURY Fig.5 OR PROPERTY DAMAGE. lippert.com 432-LIPPERT (432-547-7378) Rev. 09.20.24 CCD-0001269...
- Page 5 17. Slide the drive support arm assembly outward to align below the holes of the awning that was removed before securing the upper bracket. NOTE: Silicone sealant MUST be used on all screws and holes to prevent water from infiltrating the unit. Fig.7 lippert.com 432-LIPPERT (432-547-7378) Rev. 09.20.24 CCD-0001269...
- Page 6 (There will be 2 screws in the lower holes and 2 screws in the middle holes). NOTE: For units with fiberglass sidewalls, Lippert requires the use of rivets for securing the lower and middle sections of the mount arm.
- Page 7 (Fig.14B) to the support arm. Fig.12 Fig.14 4. Separate the drive head from the support arm and secure the support arm to the unit in the travel position. lippert.com 432-LIPPERT (432-547-7378) Rev. 09.20.24 CCD-0001269...
- Page 8 NOTE: Padding the locking pliers will prevent the scratching of components. THE SPRING IS UNDER EXTREME TENSION. IMPROPER HANDLING COULD CAUSE DEATH, SERIOUS INJURY OR PROPERTY DAMAGE. Fig.18 lippert.com 432-LIPPERT (432-547-7378) Rev. 09.20.24 CCD-0001269...
- Page 9 14. Insert the Solera drive head assembly shaft (Fig.21B) is consistent at both ends of the awning, and does not into the end cap (Fig.21A). exceed 3” below the rail. lippert.com 432-LIPPERT (432-547-7378) Rev. 09.20.24 CCD-0001269...
- Page 10 NOTE: Silicone sealant MUST be used on all screws and skipping all cam lock instructions. holes to prevent water from infiltrating the unit. NOTE: For units with fiberglass sidewalls, Lippert requires the use of rivets for securing the lower and middle sections of the mount arm.
- Page 11 SNOW OR DEBRIS ON THE AWNING FABRIC. KEEP THE AWNING ARM AREA CLEAR OF PEOPLE AND OBJECTS WHEN IN OPERATION. FAILURE TO HEED THESE Fig.26 WARNINGS COULD CAUSE SEVERE PERSONAL INJURY AND /OR PROPERTY DAMAGE. lippert.com 432-LIPPERT (432-547-7378) Rev. 09.20.24 CCD-0001269...
- Page 12 Fig.28 4. Set pitch using pitch arms with gas strut (Fig.29A). Scan the QR Code below to watch the video on How to Correctly Pitch a Lippert Awning. A. Choose the side of the awning for optimum shade or convenient water runoff. Pitch MUST be set by adjusting the articulating arm to tip one side of the awning to allow water runoff.
- Page 13 THE UNIT. FAILURE TO RETRACT THE AWNING IN position or snapped into a straight position by pushing the THOSE INSTANCES COULD CAUSE EXTENSIVE release button (Fig.32A) and sliding the sleeve (Fig.32B). DAMAGE TO THE AWNING AND UNIT. Slide Fig.32 lippert.com 432-LIPPERT (432-547-7378) Rev. 09.20.24 CCD-0001269...
- Page 14 Awning rolls up backward. is not a defect. To correct the fabric orientation, simply operate the crank handle in the retract direction and the awning will then extend to its correct orientation and normal operation can resume. lippert.com 432-LIPPERT (432-547-7378) Rev. 09.20.24 CCD-0001269...
- Page 15 5 minutes. This will apply the mixture to the bottom of the fabric as well. Extend the awning and hose off with fresh water. Repeat if necessary. Allow to dry before retracting. Notes lippert.com 432-LIPPERT (432-547-7378) Rev. 09.20.24 CCD-0001269...
- Page 16 All manual information is subject to change without notice. Revised editions will be avail- able for free download at lippert.com. Manual information is considered factual until made obsolete by a revised version. Please recycle all obsolete materials and con- tact Lippert with concerns or questions.
Need help?
Do you have a question about the Solera Hybrid 1500 and is the answer not in the manual?
Questions and answers