Default Configuration and Technical
B.
Specifications
This appendix provides factory default settings and technical specifications for the N300
Wireless Dual Band ADSL2+ Modem Router DGND3300v2.
Restoring the Factory Configuration Settings
Note:
This procedure erases your current configuration, including your
wireless security. When you log in after resetting, you will be
prompted to configure these settings.
This section explains how to restore the factory default configuration settings. This procedure
restores the admin user name, the password to password, and the IP address to
192.168.0.1 or http://www.routerlogin.net. You can erase the current configuration and
restore factory defaults in two ways:
•
Use the Erase function of the router (see
•
Use the Restore Factory Settings button on the rear panel of the router. Use this method
for cases when the administration password or IP address is not known.
Using the Restore Factory Settings Button
To restore the factory configuration settings when you do not know the administration
password or IP address, you must use the Restore Factory Settings button on the rear panel
of the N300 wireless modem router.
1.
Press and hold the Restore Factory Settings button until the Power LED turns red
(about 6 seconds).
Erasing the Configuration
Appendix B. Default Configuration and Technical Specifications
B
on page 58).
| 147