NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router User Manual page 91

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
Follow this procedure to configure a gateway-to-gateway VPN tunnel using the VPN Wizard.
IP: 192.168.0.1
14.15.16.17
Gateway A
Figure 53. Gateway-to-Gateway VPN Tunnel
Set the LAN IPs on each N300 wireless modem router to different subnets and configure
each correctly for the Internet. The subsequent examples assume the settings shown in the
following table.
Table 4. Gateway-to-Gateway VPN Tunnel Configuration Worksheet
Parameter
Connection Name
Pre-Shared Key
Secure Association
Perfect Forward Secrecy
Encryption Protocol
Authentication Protocol
Diffie-Hellman (DH) Group
Key Life in seconds
IKE Life Time in seconds
VPN Endpoint
Gateway_A
Gateway_B
Note: The LAN IP address ranges of each VPN endpoint must be
different. The connection will fail if both are using the NETGEAR
default address range of 192.168.0.x.
VPN tunnel
Value to Be Entered Field Selection
GtoGr
12345678
N/A
N/A
N/A
N/A
N/A
28800 (8 hours)
3600 (1 hour)
Local IPSecID LAN IP Address
GW_A 192.168.0.1
GW_B 192.168.3.1
Internet
N/A
N/A
Main Mode
Enabled
DES
MD5
Group 1
N/A
N/A
Subnet Mask
255.255.255.0
255.255.255.0
Chapter 6. Virtual Private Networking
IP:192.168.3.1
22.23.24.25
Gateway B
Manual Keys
Disabled
3DES
SHA-1
Group 2
FQDN or Gateway
IP (WAN IP
Address)
14.15.16.17
22.23.24.25
| 91