Technical Specifications and Default
This appendix provides technical specifications and factory default configuration settings for the
wireless modem router.
General Specifications
The following table lists technical specification for the wireless modem router.
Network Protocol and
Standards
Compatibility
Power adapter
Physical
Environmental
Regulatory compliance Meets requirements of: FCC Part 15 Class B; VCCI Class B; EN 55 022
Interface specifications LAN: 10BASE-T or 100BASE-Tx, RJ-45
TCP/IP, DHCP, PPPoE or PPPoA, RFC 1483 Bridged or Routed
Ethernet, and RFC 1577 Classical IP over ATM
North America: 120V, 60 Hz, input
UK, Australia: 240V, 50 Hz, input
Europe: 230V, 50 Hz, input
Japan: 100V, 50/60 Hz, input
All regions (output): 12 V DC @ 1.0A output
Dimensions: 6.9 in. x 1.1 in. x 4.7 in.
(175.3 mm x 27.9 mm x 119.4 mm)
Weight: 0.7 lbs. ( 0.3 kg)
Operating temperature: 0° to 40° C
Operating humidity: 90% maximum relative humidity, noncondensing
(CISPR 22), Class B
WAN: ADSL, Dual RJ-11, pins 2 and 3
T1.413, G.DMT
ITU Annex A or B (ITU Annex A and ITU Annex B are separate models.
The same unit cannot do both.)
Configuration
(32º to 104º F)
33