NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router User Manual page 19

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
Figure 9.
The settings for this screen are explained in the following table.
Settings
Name (11N SSID)
Name (11G SSID)
Region
Mode
Description
This is the wireless network name. Enter a 32-character (maximum) name in this
field. This field is case-sensitive.
In a setting where there is more than one wireless network, different wireless
network names provide a means for separating the traffic. Any device that you
want to participate in a wireless network must use the SSID.
The location where the N300 Wireless Modem Router is used.
Specify which 802.11 data communications protocol is used. You can select one
of the following modes:
• Up to 300 Mbps at 2.4 GHz. Performance mode, using channel expansion to
achieve the 270 Mbps data rate. The N300 wireless modem router uses the
channel you selected as the primary channel and expands to the secondary
channel (primary channel +4 or –4) to achieve a 40 MHz frame-by-frame
bandwidth. The N300 wireless modem router detects channel usage and
disables frame-by-frame expansion if the expansion would result in
interference with the data transmission of other access points or clients.
• Up to 300 Mbps at 5 GHz and 54 Mbps at 2.4 GHz. This is the default mode,
which is recommended.
• Up to 145 Mbps at 2.4 GHz. Neighbor friendly mode, for reduced interference
with neighboring wireless networks. Provides two transmission streams with
different data on the same channel at the same time, but also allows 802.11b
and 802.11g wireless devices.
• Up to 145 Mbps at 5 GHz and 54 Mbps at 2.4 GHz. Legacy mode, for
compatibility with the slower 802.11b and 802.11g wireless devices.
Chapter 2. Wireless Settings | 19