NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router User Manual page 11

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
Figure 5.
3. Select Yes or No depending on whether your ISP requires a login. This selection changes
the fields available on the Basic Settings screen.
• Yes. If your ISP requires a login, select the encapsulation method. Enter the login
name. If you want to change the login time-out, enter a new value in minutes.
• No. If your ISP does not require a login, enter the account name, if required, and the
domain name, if required.
4. Enter the settings for the IP address and DNS server. If you enter or change a DNS
address, restart the computers on your network so that these settings take effect.
5. If no login is required, you can specify the MAC Address setting.
6. Click Apply to save your settings.
7. Click Test to test your Internet connection. If the NETGEAR website does not appear within
one minute, see
When your Internet connection is working, you do not need to launch the ISP's login program
on your computer to access the Internet. When you start an Internet application, your N300
wireless modem router automatically logs you in.
The fields displayed depend on whether or not your Internet connection requires a login.
Troubleshooting in Appendix A.
Chapter 1. Router Internet Setup | 11