Default Configuration And Technical Specifications; Restoring The Default Factory Configuration Settings - NETGEAR WNDR3400 - N600 Wireless Dual Band Router User Manual

This appendix provides factory default settings and technical specifications for the N600 Wireless
Dual Band Router WNDR3400.

Restoring the Default Factory Configuration Settings

You can restore the factory default configuration settings to reset the router's user name to admin,
the password to password, and the IP address to www.routerlogin.net. This procedure erases
your current configuration, including your wireless security settings, and restores the factory
defaults. When you log in after resetting, the Smart Wizard configuration assistant prompts you to
configure these settings.
To restore the factory default configuration settings:
1. Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings
button, located on the bottom of the router, for over 5 seconds until the Power light turns to
blinking amber.
2. Release the restore factory settings button, and wait for the router to reboot.
The factory default settings are restored so that you can access the router from your Web
browser using the factory defaults.
Table A-1. WNDR3400 Router Default Configuration Settings
Feature
Router login
Router login URL
User name (case-sensitive) printed on
product label
Password (case-sensitive) printed on
product label

Default Configuration and Technical Specifications

N600 Wireless Dual Band Router WNDR3400 User Manual
Default Configuration and
Technical Specifications
Default Setting
http://www.routerlogin.net or
http://www.routerlogin.com
admin
password
v1.0, August 2010
Appendix A
A-1