Table of Contents
Advertisement
Installing the speakers on a wall
Caution
• Contact a screw shop or installer for information regarding the wall material or screws to be used.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam. Install the speakers on a vertical and flat wall where reinforcement is applied.
• Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
Before installing the speakers on a wall, connect the speaker cord to the speaker.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with
the color tube to 3, and the speaker cord without the color tube to #.
1
Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.
See the illustrations below.
3
30 mm (1
/
inches)
16
2
Fasten the screws to the wall.
DAV-TZ100/DAV-TZ200
For the center speaker
8 to 10 mm
11
13
(
/
to
/
inch)
32
32
18
GB
Color tube
Front left speaker (L): White
Front right speaker (R): Red
Center speaker: Green
Surround left speaker (L): Blue
Surround right speaker (R): Gray
5
4 mm (
/
inch)
32
145 mm
3
(5
/
inches)
4
5 mm
7
(
/
inch)
32
10 mm
13
(
/
inch)
32
For the other speakers
8 to 10 mm
11
13
(
/
to
/
inch)
32
32
Hole on the back of
the speaker
Hide quick links:
Advertisement
Table of Contents
