Advertisement
Quick Links
Advertisement
Related Manuals for Work Pro Integra Series
Summary of Contents for Work Pro Integra Series
- Page 1 WAC7 Installation Guide for Integra Series v.1.0...
- Page 2 Integra Remote Installation Guide for WAC-7 If you want to install the Integra Remote application on the WAC-7 touch device you will need a USB Type-A male-male cable, in most situations, you will also need to have an ADB console program installed on your computer such as Minimal ADB and Fastboot.
- Page 3 By pressing the button in the upper left corner we will access a first menu of options, we will continue pressing Edit to display the next menu. We will have to press System Settings to access the Android menu where we will have to make sure we have the following correct parameters: In developer options, set the USB port to Device Mode...
- Page 4 Security options, allow you to install unknown applications In the Ethernet menu you can enter the desired static IP, if you have not already done so via Workcad Configurator...
- Page 5 Once our WAC-7 is configured correctly we can connect it via USB cable to our computer, if you wish you can place the application inside the ADB console program folder to facilitate the syntax of the route. Run the program If we already have the WAC-7 connected, we must write the following to detect it.
- Page 6 It will have been detected if you can see this on the screen, then we will install the application by typing: adb install IntegraRemote.apk Now we must force the WAC-7 to start with the new application, for this and for future installations we can directly access the Android Settings with the command: adb shell am start com.android.settings Note that this has not closed the previous running application...
- Page 7 Now access Home to set up the startup app Restart the WAC now better than ever with the command: adb Reboot...
Need help?
Do you have a question about the Integra Series and is the answer not in the manual?
Questions and answers