Fishman AFX DELAY Manual page 13

Footswitch
When the green light above the footswitch is on, the effect is active. Step on the
footswitch to bypass the delay. Note when the effect is bypassed, your instru-
ment signal remains buffered.
Delay Hold
This feature is activated with the footswitch. It allows you to make infi nitely
repeating little loops to solo over or on which to overdub. The loops you create
can be up to 2.9 seconds long.
To activate the hold feature: fi rst set your loop length using the delay time
conrol on one of the 8 effects, then step on the footswitch for more than one sec-
ond. When the green light starts blinking red, lay down your loop! The loop will
begin to play back when you release the footswitch or run out of recording time,
which ever comes fi rst. Step on the footswitch once more to cancel delay hold.
For the longest recording time, select the long delay and set delay time to
max. You can also use the tap switch to set the length of your loop. To cancel
hold, tap the footswitch.
13