Troubleshooting - iRobot ROMBA 505 Manual

Troubleshooting

Roomba will tell you something is wrong with a two-tone "uh-oh" sound. A narrated
voice will tell you there is an issue when you try to start a cleaning cycle.
Refer to the chart below to resolve Roomba's problem.
If the problem is not resolved, visit www.irobot.com/support.
Roomba says
Remove and clean
Roomba's front wheel
Inspect and clean Roomba's
cliff sensors
Inspect and clean Roomba's
drive wheel(s)
Please remove and clean
Roomba's brushes
Please clean Roomba's side
brush
Charging Errors 1-10
Error 1-10
22
iRobot Roomba 500 Series
Likely cause
The front wheel
is stuck
Roomba's cliff
sensors are dirty
A drive wheel is
stuck
The main brushes
cannot turn
The side brush
cannot turn
Roomba has a
charging error
Roomba has an
unspecified error
What to do
Roomba is stuck or something is
wrapped around the front wheel.
Remove and clean hair and debris from
Roomba's front wheel.
Wipe off Roomba's cliff sensors with a
dry cloth.
Roomba is stuck or something is
wrapped around a drive wheel. Clean
Roomba's wheels, push them in and out
and confirm that they turn freely.
Turn over Roomba. Remove and clean
Roomba's brushes. (see pg. 20)
Turn Roomba over and clean the side
brush. Remove the sidebrush with a
screwdriver to thoroughly clean it.
Contact iRobot Customer Support.
Contact iRobot Customer Support.