Table of Contents
Advertisement
PhoneixNet Support
CPU L1 Cache
CPU L2 Cache
Quick Power On Self Test
ATA & SCSI Boot Order
First Boot Device
Second Boot Device
Third Boot Device
Boot other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
OS Select For DRAM > 64MB
HDD S.M.A.R.T. Capability
Video BIOS Shadow
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
¡ ü ¡ ý ¡ ú ¡ û
F5:Previous Values
Anti-Virus Protection
Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection.
If this function is enabled and someone attempt to write data into this area, BIOS will show a
warning message on screen and alarm beep.
Disabled (default) No warning message to appear when anything attempts to access the
Enabled
CPU Internal Cache
The default value is Enabled.
Enabled (default) Enable cache
Disabled
Note: The internal cache is built in the processor.
External Cache
Choose Enabled or Disabled. This option enables the Level 2 cache memory.
CPU L2 Cache ECC Checking
Choose Enabled or Disabled. This option enables the Level 2 cache memory ECC (error
check correction).
Quick Power On Self-Test
This category speeds up Power On Self Test (POST) after you power on the computer. If this
is set to Enabled. BIOS will shorten or skip some check items during POST.
Enabled (default) Enable quick POST
Disabled
Disabled
Enabled
Enabled
Enabled
ATA, SCSI
Floppy
HDD-0
CDROM
Enabled
Disabled
Enabled
On
Normal
Disabled
6
250
Setup
Non-OS2
Disabled
Enabled
F6:Optimized Defaults
boot sector or hard disk partition table.
Activates automatically when the system boots up causing a warning
message to appear when anything attempts to access the boot sector of
hard disk partition table.
Disable cache
Normal POST
Menu Level >
F7:Standard Defaults
26
F1:General Help
Advertisement
Table of Contents
