Power Management Setup - JETWAY S446R2A User Manual

There is a built-in parallel port on the on-board Super I/O chipset that Provides Standard, ECP, and
EPP features. It has the following option:
Disabled
(3BCH/IRQ7)/
(278H/IRQ5)/
(378H/IRQ7)
Parallel Port Mode
SPP : Standard Parallel Port
EPP : Enhanced Parallel Port
ECP : Extended Capability Port
SPP/EPP/ECP/ECP+EPP
To operate the onboard parallel port as Standard Parallel Port only, choose "SPP." To operate
the onboard parallel port in the EPP modes simultaneously, choose "EPP."
"ECP", the onboard parallel port will operate in ECP mode only. Choosing "ECP+EPP" will
allow the onboard parallel port to support both the ECP and EPP modes simultaneously. The
ECP mode has to use the DMA channel, so choose the onboard parallel port with the ECP
feature. After selecting it, the following message will appear: "ECP Mode Use DMA" at this
time, the user can choose between DMA channels 3 to 1. The onboard parallel port is EPP
Spec. compliant, so after the user chooses the onboard parallel port with the EPP function, the
following message will be displayed on the screen: "EPP Mode Select." At this time either
EPP 1.7 spec. or EPP 1.9 spec. can be chosen.

3-8 Power Management Setup

The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
ACPI Function
ACPI Suspend Type
Video Off Option
Video Off Method
Switch Function
MODEM Use IRQ
Hot key Function as
Power Button Function
> PM Wake Up Events
¡ ü ¡ ý ¡ ú ¡ û Move Enter:Select
F5:Previous Values
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power
Management (ACPI). The settings are Enabled and Disabled.
Video Off Option
Line Printer port 0
Line Printer port 2
Line Printer port 1
Power Management Setup
Enabled
S1(POS)
Always Off
V/H SYNC+Blank
Break/Wake
Auto
Power Off
Instant Off
Press Enter
+/-/PU/PD:Value F10:Save ESC:Exit
F6:Optimized Defaults
Menu Level >
F7:Standard Defaults
33
By choosing
Item Help
F1:General Help