JETWAY S446R2A User Manual page 18

(4) PS/2 Mouse & PS/2 Keyboard Connector: KBMS1
The connectors for PS/2 keyboard and PS/2 Mouse.
(5) USB Port connector: USB1
The connectors are 4-pin connector that connect USB devices to the system board.
(6) Parallel Port Connector (25-pin female): PRINT
Parallel Port connector is a 25-pin D-Subminiature Receptacle connector. The On-
board Parallel Port can be disabled through the BIOS SETUP. Please refer to Chapter
3 "INTEGRATED PERIPHERALS SETUP" section for more detail information.
Audio and Game Connector : AUD _ GAME
(7)
This Connector are 3 phone Jack for LINE-OUT, LINE-IN, MIC and a 15-pin
D-Subminiature Receptacle Connector for joystick/MIDI Device.
Line-out :
Line-in :
MIC :
Game/MIDI :
(8) Serial Port COM1, COM2 : COM1, COM2
COM1, COM2 are the 9-pin D-Subminiature mail connector. The On-board serial
port can be disabled through BIOS SETUP. Please refer to Chapter 3 "INTEGRATED
PERIPHERALS SETUP" section for more detail information.
(9) Floppy drive Connector (34-pin block): FDC1
Power Connector on Motherboard
Audio output to speaker
Audio input to sound chip
Microphone Connector
For joystick or MIDI Device
PS/2
MOUSE
PS/2
Keyboard USB
COM1
GND
GND
GND
3.3V
3.3V
5V
PRINT GAME/MIDI PORT
COM2
15
BLK
BLK
BLK
ORG
ORG
RED
Power Plugs from Power Supply
MIC
LINE-IN
LINE-OUT