Table of Contents
Advertisement
(3)
IDE Activity LED: HDLED
This connector connects to the hard disk activity indicator light on the case.
(4)
Reset switch lead: RESET
This 2-pin connector connects to the case-mounted reset switch for rebooting your
computer without having to turn off your power switch. This is a preferred method
of rebooting in order to prolong the lift of the system's power supply. See the figure
below.
(5)
Speaker connector: SPK2
This 4-pin connector connects to the case-mounted speaker. See the figure below.
(6)
Power LED: ACPILED
The Power LED is light on while the system power is on. Connect the Power LED
from the system case to this pin.
(7)
Power switch: PWRBT
This 2-pin connector connects to the case-mounted power switch to power ON/OFF the
system.
(8)
Wake On-LAN Headers (3-pin) : WOL
USB2
Pin 1
USB Port Headers
SPK2
FP1
Pin 1
Pin 1
System Case Connections
18
Advertisement
Table of Contents
