JETWAY 920BFR3A User Manual page 4

combine with DVD player to create a home theater system (This upgrade kit includes
Optical Module, Optical Cable, and Software DVD Driver).
• Chipset: SiS 620/5595 AGPset chip with I/O subsystems; CMI 8738 3D PCI Audio chip
(Option for motherboard that embedded Audio chip).
• DRAM Memory Support: supports 2 168-pin DIMMS(3.3V)from a memory size befween
16MB to 1.0GB.
• ISA and PCI expansion Slots: Three PCI slots ,Privodes one 16-bit ISA slot.
• Super Multi-I/O: Provides two high-Speed UART compatible serial ports and one parallel
port with EPP and ECP capabilities. Two floppy drives of either 5.25" or 3.5" (1.44MB or
2.88MB) are also supported without an external card.
• PCI Bus Master IDE Controller and ULTRA DMA 33/66: On-board PCI Bus Master IDE
controller with two connectors that supports four IDE devices in two channels, provides
faster data transfer rates, and supports Enhanced IDE devices such as Tape Backup, CD-
ROM drives and LS-120. This controller also supports PIO Modes 3 and 4 and Bus Master
IDE DMA 33/66Mbyte/Second.
• ACPI supporting for OS Directed Power Management
Keyboard Power On: When use ATX power supply and JP1 1-2 closed,choose power on
function by password in BIOS , can control power supply on by keyboard instead of power
button .
Ring-in Wake up: When Ring-In the system can wake up from SMI Mode.
Ring-in Power On: When Ring-In the system can power on automatic by this function by
use of ATX power supply.
RTC Power On: When use of ATX power supply and Enabled RTC Power On function, you
can setting RTC alarm to power on the system at the time length you setting .
Power Button: Press the button will place the system power on/off when use ATX power
supply .
Software off when use ATX power supply.
• Power Support: Efficient PWM switching power instead of traditional Linear Voltage
Regulator to prevent power component from being burned-out.
• Meets PC99 Requirements.
• Optional IRDA and PS/2 Mouse Connector: This motherboard supports an dedicated
16C550 standard UART,supporting infrared communication module for wireless interface
and PS/2 mouse cable set.
• Optional USB DEVICE Connector: This motherboard supports two USB port connectors for
USB devices.
• DMI Function Supporting.
• PC Health Monitoring : Allows you track PC's CPU temperature, system voltage and fan
speed. When current temperature over warning temperature, the system will warning you
by alarm.
• Baby AT Form Factor: Dimensions 22cm x 25cm.
Chapter 2
2