JETWAY 920BFR3A User Manual page 35

3d-agp vga / 3d-audio m/b for pentium ii / iii
Table of Contents

Advertisement

Mixer panel while the four speakers mode is enabled.
Mixer panel while the four speakers mode is disabled.
Volume Control: Clicking on this button shows and allows you to use the output level controls.
Recording Control: Clicking on this button shows and allows you use the input level controls.
Input and Output Level Sliders and Buttons: For each input or output signal type, the
control slider controls the loudness whereas the horizontal slider controls the balance
between the two speakers.
changing slider positions.
Control types and names might vary. The common types are listed below:
• Vol: The master control for all outputs. The strength of an output signal is determined by
both the Vol slider and the slider for the individual output. To affect all outputs, move the
Vol slider. To change the output of an individual output type, move its slider.
• Line-in/Rear: Controls the audio hardware's Line In or Line Out levels. Line levels might
be for an externally attached cassette player, for instance, while the four speakers mode is
enabled, this control becomes the Rear speaker volume control.
• Mic: Controls the microphone input level.
• Wave: Controls wave (voice) playback or the recording levels.
• FM: Controls the FM music playback or the recording level.
• Aux-in: Controls the Aux-in music play or the recording level.
• PC-SPK: Controls the external PC speaker input level.
• CD: Controls the CD drive output level, for CD drives configured to play their audio output
through the PC's audio hardware.
• 4SPK: Turn on or turn off the Rear speakers effect.
• Surround: Turn on or turn off the 3D surround sound effect.
• SPDIF-in: Turn on or turn off the SPDIF digital signal input.
• Advanced: Check the SPDIF status, HRTF 3D sound CPU Utilization, turn on th
Microphone Booster.
Mute Buttons: Toggle between muting and enabling the signal. A button with a lit LED is
enabled, and when it is not lit, it means it is mute. Several output signals can usually be
enabled at once.
MP3 Player : MP3 player can play both wave files and MP3 files.
The mute
button temporarily stops input or output without
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

920bf920bnJ-920bf

Table of Contents