Power Management Setup - JETWAY 920BFR3A User Manual

clock cycles of CAS latency depends on the DRAM timing. Do not reset this field from
the default value specified by the system designer.
The choice: 2T, 3T.
• AGP Aperture Size : Select the size of the Accelerated Graphics Port (AGP) aperture.
The aperture is a portion of the PCI memory address range dedicated for graphics
memory address space. Host cycles that hit the aperture range are forwarded to the AGP
without any translation. See www.agpforum.org for APG information.
The choice: 4 MB, 8MB, 16 MB, 32 MB, 64 MB, 128 MB, 256MB.
• CPU Host/SDRAM Clock : Choose CPU Front side Bus clock (Host Clock)/SDRAM Clock
The choice: 66/66,75/75,83/83,95/95,100/100.
• CPU Clock Ration Jumpless : Enable/disable the CPU Clock ration control.
The choice: Enabled, Disabled.
• Processor Core Frequency : Select Ratio.
The choice: X2.0,X2.5,X3.0,X3.5,X4.0,X4.5,X5.0,X5.5,X6.0,X6.5,X7.0,X7.5,X8.0

3-4 POWER MANAGEMENT SETUP

The Power Management Setup allows you to configure you system to most effectively save
energy while operating in a manner consistent with your own style of computer use.
ACPI function
Power Management
PM Control by APM
Video Off Option
Video Off Method
Switch Function
Do z e Speed (div by) : 2/8
Stdby Speed(div by) : 1/8
MODEM Use IR Q
Hot Key Fumction As : Power OFF
** PM Monitor **
HDD Off After
Do z e Mode
Standby Mode
Suspend Mode
• ACPI function: Select Enabled if your system has an ACPI function.
The choice: Enabled, Disabled.
• Switch Function: You can choose whether or not to permit your system to enter complete
Suspend mode. Suspend mode offers greater power savings, with a correspondingly
longer awakening period..
The choice: Break/Wake, Disabled.
• Doze Speed (div by) : Sets the CPU's speed during Doze mode. The speed is reduced to
a fraction of the CPU's normal speed. The divisors range from 1 to 8
The choice: 1~8.
ROM PCI/ISA BIOS (2A6INJ19)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
: Enabled
: User Define
: Yes
: Susp Stby- > Off
: V/H SYNC + B lank
: Break/Wake
: 3
: Disable
: Disable
: Disable
: Disable
** PM Events **
HDD Ports Activity
COM Ports Activity
LPT Ports Activity
VGA Activity
IR Q [ 3 -7 , 9-15 ] , NMI : Enabled
IR Q 8 Bredk Suspend
Power Button Over Ride : Instant OFF
Ring Power Up Control : Disabled
KB Power ON Password : Enter
Power Up by Alarm
Esc: Q u it
F1 : Help Pu/Pd/ + / -: Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Figure 3-5
23
: Enabled
: Enabled
: Enabled
: Enabled
: Disabled
: Disabled
¡ ô ¡ õ ¡ ÷ ¡ ö : Select Item