Pc Health Status - JETWAY 618AFP2A User Manual

The settings are: Enabled and Disabled.
Resource Controlled By
The Award Plug and Play BIOS has the capacity to automatically configure all of the boot
and Plug and Play compatible devices. However, this capability means absolutely nothing
unless you are using a Plug and Play operating system such as Windows
this field to "manual" choose specific resources by going into each of the sub menu that
follows this field (a sub menu is preceded by a ">").
The settings are: Auto(ESCD), Manual.
IRQ Resources
When resources are controlled manually, assign each system interrupt a type, depending on
the type of device using the interrupt.
DMA Resources
This sub menu can let you control the DMA resource.
PCI/VGA Palette Snoop
Leave this field at Disabled. The settings are Enabled, Disabled.

3-10 PC Health Status

This section shows the Status of you CPU, Fan, Warning for overall system status. This is
only available if there is Hardware Monitor onboard.
CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
Show PC Health in Post
Shutdown Temperature
Vcore
Vcc 1.8V
VCC 3.3V
VCC 5V
+12V
-12V
-5V
5VSB
Vbat
System Temperature
CPU Temperature
FAN1 Speed
FAN2 Speed
FAN3 Speed
Move Enter:Select
¡ ü ¡ ý ¡ ú ¡ û
F5:Previous Values
CPU Temperature
During Enabled, this will warn the user when the CPU temperature reaches a certain
temperature.
Current System Temp/Current CPU Temperature/Current FAN1, FAN2, FAN3
Speed/ Vcore/VTT/3.3V/+5V/+12V/-12V/ -5V/VBAT(V)/5VSB(V)
PC Health Status
Enabled
Disabled
1.65V
1.85V
3.3V
4.97V
11.90V
(-)12.03V
(-) 5.10V
4.97V
3.29V
25 ° C
35 ° C
5843 RPM
6132 RPM
5720 RPM
+/-/PU/PD:Value F10:Save ESC:Exit
F6:Optimized Defaults
42

95/98. If you set
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults