Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Axis Manuals
  4. Speakers
  5. D4200-VE
  6. User manual

Axis D4200-VE User Manual

Network strobe speaker
Hide thumbs Also See for D4200-VE:

Advertisement

Quick Links

Download this manual
AXISD4200-VENetworkStrobeSpea
ker
AXIS D4200-VE Network Strobe Speaker
User manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the D4200-VE and is the answer not in the manual?

Questions and answers

Related Manuals for Axis D4200-VE

Summary of Contents for Axis D4200-VE

  • Page 1 AXISD4200-VENetworkStrobeSpea AXIS D4200-VE Network Strobe Speaker User manual...
  • Page 2 AXIS D4200-VE Network Strobe Speaker Table of Contents Solution overview ............................4 ................................4 Installation ..............................5 Get started..............................6 ................................6 Find the device on the network.........................6 Browser support ..........................6 Open the device's web interface........................6 Create an administrator account.......................6 Secure passwords ............................7 Make sure that no one has tampered with the device software ..............7 Configure your device.............................8...
  • Page 3 Light pattern names ..........................68 Sound pattern names..........................68 Clean your device............................70 Troubleshooting............................71 Reset to factory default settings ......................71 AXIS OS options ............................71 Check the current AXIS OS version ......................71 Upgrade AXIS OS...........................71 Technical issues, clues, and solutions.......................72 Performance considerations ........................74 Contact support ............................74...
  • Page 4 If you are using an audio or video management software, you can use that software for configuring the device. The following management software are available for controlling your audio system: • AXIS Audio Manager Edge — Audio management software for small systems. Comes pre-installed on all audio devices with a firmware equal to or higher than 10.0. –...
  • Page 5 Don’t install the strobe speaker and connected devices within 3 m of the center of the railway track. This video is an example of how to install the AXIS D4200-VE Network Strobe Speaker. To watch this video, go to the web version of this document.
  • Page 6 Open the device's web interface Open a browser and type the IP address or host name of the Axis device. If you do not know the IP address, use AXIS IP Utility or AXIS Device Manager to find the device on the network.
  • Page 7 Make sure that no one has tampered with the device software To make sure that the device has its original AXIS OS, or to take full control of the device after a security attack: Reset to factory default settings. See .
  • Page 8 AXIS D4200-VE Network Strobe Speaker Configure your device Turn off maintenance mode after installing the strobe speaker CAUTION To protect the installer from hearing damage and from dazzling by bright light, it’s recommended to have maintenance mode on when installing the device.
  • Page 9 AXIS D4200-VE Network Strobe Speaker Browse to locate the file or drag and drop the file that you want to import. Click Save. To copy one or more profiles and save to other devices, you can export them: Select the profiles.
  • Page 10 Go to the device interface > Audio > Speaker test. To calibrate the audio device, click Calibrate. Note Once the Axis product is calibrated, the speaker test can be run at any time. To run the speaker test, click Run the test. Note It is also possible to run the calibration by pressing the control button on the physical device.
  • Page 11 AXIS D4200-VE Network Strobe Speaker Enter a Name. Select the Condition that must be met to trigger the action. If you specify more than one condition for the rule, all of the conditions must be met to trigger the action.
  • Page 12 AXIS D4200-VE Network Strobe Speaker Create a rule to start a profile: Go to System > Events and add a rule. Type a name for the rule. In the list of conditions, select Call > State change. In the list of reasons, select Accepted by device.
  • Page 13 Create a profile in the strobe speaker called: “Strobe speaker profile”. • Set up AXIS Motion Guard in the camera and create a profile called: “Camera profile”. • Make sure to use AXIS Device Assistant with firmware version 10.8.0 or later.
  • Page 14 Create a profile in the strobe speaker. • Set up AXIS Motion Guard in the camera and create a profile called “Camera profile”. Create two recipients in the camera: In the camera’s device interface, go to System > Events > Recipients and add a recipient.
  • Page 15 AXIS D4200-VE Network Strobe Speaker – Name: Deactivate virtual IO1 – Condition: Applications > Motion Guard: Camera profile – Select Invert this condition. – Action: Notifications > Send notification through HTTP – Recipient: Deactivate virtual port – Query string suffix: schemaversion=1&port=1 Click Save.
  • Page 16 AXIS D4200-VE Network Strobe Speaker Add another rule with the following information: – Name: No motion – Condition: Applications > Motion alarm – Select Invert this condition. – Action: MQTT > Send MQTT publish message – Topic: Motion – Payload: Off –...
  • Page 17 AXIS D4200-VE Network Strobe Speaker 2.2. Click Add recipient. 2.3. Name the recipient "Speaker test recipients" 2.4. Under Type, select Email. 2.5. Under Send email to, enter the email addresses of the recipients. Use commas to separate multiple addresses. 2.6.
  • Page 18 AXIS D4200-VE Network Strobe Speaker Select Intensity and Duration. Click Save. Set direction input for the port: Go to System > Accessories > I/O ports. Go to Port 1 > Normal state and click Circuit closed. Create a rule: Go to System > Events and add a rule.
  • Page 19 AXIS D4200-VE Network Strobe Speaker Go to the device interface of the speaker, by entering its IP address in a web browser. Go to System > SIP > SIP settings and select Enable SIP. To allow the device to receive incoming calls, select Allow incoming calls.
  • Page 20 Status Device info Shows the device information, including AXIS OS version and serial number. Upgrade AXIS OS: Upgrade the software on your device. Takes you to the Maintenance page where you can do the upgrade. Time sync status Shows NTP synchronization information, including if the device is in sync with an NTP server and the time remaining until the next sync.
  • Page 21 Shows what kind of access to the device that is active, what encryption protocols are in use, and if unsigned apps are allowed. Recommendations to the settings are based on the AXIS OS Hardening Guide. Hardening guide: Link to AXIS OS Hardening guide where you can learn more about cybersecurity on Axis devices and best practices.
  • Page 22 Test alarms: Click Test to trigger a detection event of a specific sound for testing purposes. Audio AXIS Audio Manager Edge AXIS Audio Manager Edge: Launch the application. Audio site security CA certificate: Select the certificate to use when you add devices to the audio site. You have to enable TLS authentication in AXIS Audio Manager Edge.
  • Page 23 AXIS D4200-VE Network Strobe Speaker Audio clips Add clip: Add a new audio clip. You can use .au, .mp3, .opus, .vorbis, .wav files. Play the audio clip. Stop playing the audio clip. The context menu contains: • Rename: Change the name of the audio clip.
  • Page 24 AXIS D4200-VE Network Strobe Speaker Shows the different audio LED activities that run on the device. You can have up to 10 activities in the audio LED status list at the same time. When two or more activities run at the same time, the activity with the highest priority will run.
  • Page 25 AXIS D4200-VE Network Strobe Speaker Create: Click to create a profile. • Preview/Stop preview: Start or stop a preview of the profile before you save it. Note You can’t have two profiles with the same name. • Name: Enter a name of the profile.
  • Page 26 AXIS D4200-VE Network Strobe Speaker Recordings Ongoing recordings: Show all ongoing recordings on the device. Start a recording on the device. Choose which storage device to save to. Stop a recording on the device. Triggered recordings will end when manually stopped or when the device is shut down.
  • Page 27 Delete: Delete the file from the storage location. Apps Add app: Install a new app. Find more apps: Find more apps to install. You will be taken to an overview page of Axis apps. Allow unsigned apps : Turn on to allow installation of unsigned apps.
  • Page 28 AXIS D4200-VE Network Strobe Speaker The time format depends on the web browser’s language settings. Note We recommend you synchronize the device’s date and time with an NTP server. Synchronization: Select an option for the device’s date and time synchronization.
  • Page 29 AXIS D4200-VE Network Strobe Speaker Network IPv4 Assign IPv4 automatically: Select to let the network router assign an IP address to the device automatically. We recommend automatic IP (DHCP) for most networks. IP address: Enter a unique IP address for the device. Static IP addresses can be assigned at random within isolated networks, provided that each address is unique.
  • Page 30 AXIS D4200-VE Network Strobe Speaker HTTPS is a protocol that provides encryption for page requests from users and for the pages returned by the web server. The encrypted exchange of information is governed by the use of an HTTPS certificate, which guarantees the authenticity of the server.
  • Page 31 Specify all subdomains in a specific domain, for example .<domain name>.com One-click cloud connection One-click cloud connection (O3C) together with an O3C service provides easy and secure internet access to live and recorded video from any location. For more information, see axis.com/end-to-end-solutions/hosted-services. Allow O3C: •...
  • Page 32 – Authentication failed: Sends a trap message when an authentication attempt fails. Note All Axis Video MIB traps are enabled when you turn on SNMP v1 and v2c traps. For more information, see AXIS OS Portal > SNMP. • v3: SNMP v3 is a more secure version, which provides encryption and secure passwords. To use SNMP v3, we recommend you to activate HTTPS, as the password is then sent through HTTPS.
  • Page 33 AXIS D4200-VE Network Strobe Speaker Certificates are used to authenticate devices on a network. The device supports two types of certificates: • Client/server certificates A client/server certificate validates the device’s identity, and can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limited protection and can be used before a CA-issued certificate has been obtained.
  • Page 34 When configured without a CA certificate, server certificate validation is disabled and the device tries to authenticate itself regardless of what network it is connected to. When using a certificate, in Axis' implementation, the device and the authentication server authenticate themselves with digital certificates using EAP-TLS (Extensible Authentication Protocol - Transport Layer Security).
  • Page 35 AXIS D4200-VE Network Strobe Speaker Blocking: Turn on to block brute-force attacks. A brute-force attack uses trial-and-error to guess login info or encryption keys. Blocking period: Enter the number of seconds to block a brute-force attack. Blocking conditions: Enter the number of authentication failures allowed per second before the block starts.
  • Page 36 AXIS D4200-VE Network Strobe Speaker Firewall: Turn on to activate the firewall. Default Policy: Select how you want the firewall to handle connection requests not covered by rules. • ACCEPT: Allows all connections to the device. This option is set by default.
  • Page 37 Custom signed AXIS OS certificate To install test software or other custom software from Axis on the device, you need a custom signed AXIS OS certificate. The certificate verifies that the software is approved by both the device owner and Axis. The software can only run on a specific device which is identified by its unique serial number and chip ID.
  • Page 38 AXIS D4200-VE Network Strobe Speaker SSH accounts Add SSH account: Click to add a new SSH account. • Enable SSH: Turn on to use SSH service. Account: Enter a unique account name. New password: Enter a password for the account. Passwords must be 1 to 64 characters long. Only ASCII printable characters (code 32 to 126) are allowed in the password, for example, letters, numbers, punctuation, and some symbols.
  • Page 39 AXIS D4200-VE Network Strobe Speaker Client ID: Enter the OpenID username. Outgoing Proxy: Enter the proxy address for the OpenID connection to use a proxy server. Admin claim: Enter a value for the admin role. Provider URL: Enter the web link for the API endpoint authentication. Format should be https://[insert URL]/.
  • Page 40 AXIS D4200-VE Network Strobe Speaker Your product may have some of the following pre-configured rules: Front-facing LED Activation: LiveStream: When the microphone is turned on and a live stream is received, then the front-facing LED on the audio device will turn green.
  • Page 41 AXIS D4200-VE Network Strobe Speaker Add a recipient: Click to add a recipient. Name: Enter a name for the recipient. Type: Select from the list: • – Host: Enter the server's IP address or hostname. If you enter a hostname, make sure that a DNS server is specified under System >...
  • Page 42 ECDSA, ED25519, and DSA. Make sure to enter the right MD5 host key that is used by your SFTP server. While the Axis device supports both MD5 and SHA-256 hash keys, we recommend using SHA-256 due to stronger security over MD5. For more information on how to configure an SFTP server with an Axis device, go to the AXIS OS Portal.
  • Page 43 (IoT). It was designed for simplified IoT integration and is used in a wide variety of industries to connect remote devices with a small code footprint and minimal network bandwidth. The MQTT client in Axis device software can simplify integration of data and events produced in the device to systems which are not video management software (VMS).
  • Page 44 AXIS D4200-VE Network Strobe Speaker MQTT client...
  • Page 45 AXIS D4200-VE Network Strobe Speaker Connect: Turn on or off the MQTT client. Status: Shows the current status of the MQTT client. Broker Host: Enter the hostname or IP address of the MQTT server. Protocol: Select which protocol to use.
  • Page 46 AXIS D4200-VE Network Strobe Speaker can let the broker deliver a message to other clients. This LWT message has the same form as an ordinary message and gets routed via the same mechanics. Send message: Turn on to send messages.
  • Page 47 AXIS D4200-VE Network Strobe Speaker SIP setup assistant: Click to set up and configure SIP step by step. Enable SIP: Check this option to make it possible to initiate and receive SIP calls. Allow incoming calls: Check this option to allow incoming calls from other SIP devices.
  • Page 48 AXIS D4200-VE Network Strobe Speaker • Register with server every: Set how often you want the device to register with the SIP server for the existing SIP accounts. • DTMF payload type: Changes the default payload type for DTMF. •...
  • Page 49 AXIS D4200-VE Network Strobe Speaker All current SIP accounts are listed under SIP accounts. For registered accounts, the colored circle lets you know the status. The account is successfully registered with the SIP server. There is a problem with the account. Possible reasons can be authorization failure, that the account credentials are wrong, or that the SIP server can’t find the account.
  • Page 50 AXIS D4200-VE Network Strobe Speaker – Server address: Enter the IP address of the SIP proxy server. – Username: If required, enter the username for the SIP proxy server. – Password: If required, enter the password for the SIP proxy server.
  • Page 51 AXIS D4200-VE Network Strobe Speaker User multicast controller: Turn on to activate multicast controller. Audio codec: Select an audio codec. Source: Add a new multicast controller source. • Label: Enter the name of a label that is not already used by a source.
  • Page 52 IP address can change) or that you use DNS. Windows SMB/CIFS names are not supported. • Network share: Enter the name of the shared location on the host server. Several Axis devices can use the same network share since each device gets its own folder.
  • Page 53 ONVIF enables interoperability between different vendor products, increased flexibility, reduced cost and future-proof systems. When you create an ONVIF account, you automatically enable ONVIF communication. Use the account name and password for all ONVIF communication with the device. For more information see the Axis Developer Community at axis.com.
  • Page 54 AXIS D4200-VE Network Strobe Speaker Add accounts: Click to add a new ONVIF account. Account: Enter a unique account name. New password: Enter a password for the account. Passwords must be 1 to 64 characters long. Only ASCII printable characters (code 32 to 126) are allowed in the password, for example, letters, numbers, punctuation, and some symbols.
  • Page 55 AXIS D4200-VE Network Strobe Speaker Add media profile: Click to add a new ONVIF media profile. Profile name: Add a name for the media profile. Video source: Select the video source for your configuration. • Select configuration: Select a user-defined configuration from the list. The configurations in the drop-down list correspond to the device's video channels, including multiviews, view areas and virtual channels.
  • Page 56 AXIS D4200-VE Network Strobe Speaker Detectors Audio detection These settings are available for each audio input. Sound level: Adjust the sound level to a value from 0–100, where 0 is the most sensitive and 100 the least sensitive. Use the activity indicator as a guide when you set the sound level. When you create events, you can use the sound level as a condition.
  • Page 57 AXIS D4200-VE Network Strobe Speaker Logs Reports and logs Reports • View the device server report: View information about the product status in a pop-up window. The Access Log is automatically included in the Server Report. • Download the device server report: It creates a .zip file that contains a complete server report text file in UTF–8 format, as well as a snapshot of the current live view image.
  • Page 58 Test server setup: Send a test message to all servers before you save the settings. CA certificate set: See the current settings or add a certificate. Plain config Plain config is for advanced users with experience of Axis device configuration. Most parameters can be set and edited from this page.
  • Page 59 Note All Axis device software is digitally signed to ensure that you only install verified software on your device. This further increases the overall minimum cybersecurity level of Axis devices. For more information, see the white paper “Axis Edge Vault” at axis.com.
  • Page 60 AXIS D4200-VE Network Strobe Speaker Troubleshoot Reset PTR : Reset PTR if for some reason the Pan, Tilt, or Roll settings aren’t working as expected. The PTR motors are always calibrated in a new camera. But calibration can be lost, for example, if the camera loses power or if the motors are moved by hand.
  • Page 61 AXIS D4200-VE Network Strobe Speaker Learn more Session Initiation Protocol (SIP) The Session Initiation Protocol (SIP) is used to set up, maintain and terminate VoIP calls. You can make calls between two or more parties, called SIP user agents. To make a SIP call you can use, for example, SIP phones, softphones or SIP-enabled Axis devices.
  • Page 62 Applications With applications, you can get more out of your Axis device. AXIS Camera Application Platform (ACAP) is an open platform that makes it possible for third parties to develop analytics and other applications for Axis devices. Applications can be preinstalled on the device, available for download for free, or for a license fee.
  • Page 63 Axis devices with factory default settings are pre-configured with secure default protection mechanisms. We recommend using more security configuration when installing the device. To learn more about Axis' approach to cybersecurity, including best practices, resources, and guidelines for securing your devices, go to https://www.
  • Page 64 AXIS D4200-VE Network Strobe Speaker Specifications Product overview 1 Audio LED 2 microSD card slot 3 Microphone switch 4 I/O connector 5 Status LED indicator 6 Control button 7 Audio connector 8 Network connector (PoE OUT) 9 Network connector (PoE IN)
  • Page 65 AXIS D4200-VE Network Strobe Speaker 1 Light direction A 2 Light direction B 3 Light direction C 4 Light direction D 5 Internal microphone 6 Signaling LEDs 7 Speaker 8 Audio LED LED indicators Status LED Indication Unlit Connection and normal operation.
  • Page 66 AXIS D4200-VE Network Strobe Speaker SD card slot NOTICE • Risk of damage to SD card. Don’t use sharp tools, metal objects, or excessive force when inserting or removing the SD card. Use your fingers to insert and remove the card.
  • Page 67 AXIS D4200-VE Network Strobe Speaker Note The maximum length of connected cable is 30 m (98.4 ft). I/O connector Use the I/O connector with external devices in combination with, for example, motion detection, event triggering, and alarm notifications. In addition to the 0 VDC reference point and power (12 V DC output), the I/O...
  • Page 68 AXIS D4200-VE Network Strobe Speaker 3 I/O configured as supervised input 4 I/O configured as output Note The maximum length of connected cable is 30 m (98.4 ft). Light pattern names Steady Alternate Pulse Escalate 3 steps Blink Blink 3x...
  • Page 69 AXIS D4200-VE Network Strobe Speaker Alarm: Soft quad beep Alarm: Soft triple beep Alarm: Triple high pitch Notification: Accepted Notification: Calling Notification: Denied Notification: Done Notification: Entry Notification: Failed Notification: Hurry Notification: Message Notification: Next Notification: Open Siren: Alternate Siren: Bouncy...
  • Page 70 AXIS D4200-VE Network Strobe Speaker Clean your device You can clean your device with lukewarm water and mild, nonabrasive soap. NOTICE • Harsh chemicals can damage the device. Don’t use chemicals such as window cleaner or acetone to clean your device.
  • Page 71 LTS tracks provide a fixed platform with periodic releases focused mainly on bug fixes and security updates. Using AXIS OS from the active track is recommended if you want to access the newest features, or if you use Axis end-to-end system offerings. The LTS tracks are recommended if you use third-party integrations, which are not continuously validated against the latest active track.
  • Page 72 AXIS D4200-VE Network Strobe Speaker Note When you upgrade the device with the latest AXIS OS version in the active track, the product receives the latest functionality available. Always read the upgrade instructions and release notes available with each new release before you upgrade. To find the latest AXIS OS version and the release notes, go to axis.com/ support/device-software.
  • Page 73 AXIS Camera Station Edge: free of charge, ideal for small systems with basic surveillance needs. • AXIS Camera Station 5: 30-day trial version free of charge, ideal for small to mid-size systems. • AXIS Camera Station Pro: 90-day trial version free of charge, ideal for small to mid-size systems.
  • Page 74 The following factors are the most important to consider: • Heavy network utilization due to poor infrastructure affects the bandwidth. • Running multiple AXIS Camera Application Platform (ACAP) applications simultaneously may affect the general performance. Contact support If you need more help, go to axis.com/support.
  • Page 76 T10217687 2025-06 (M3.2) © 2025 Axis Communications AB...