Child Lock; Custom Program - Maytag JMC8130DDS Owner's Manual

Operat
12°Hour CLOCK and
Oven is equipped with a 12-hour clock
and a timer that can be set up to 99
minutes and 99 seconds. Clock does
not display AM or PM
To set ctock:
Stop
1. Touch STOP
Clear
CLEAR pad.
Clock 2. Touch CLOCK
pad.
ENTER TIME
OF DAY scrolb
through display.
3. Enter desired time
by using digit
touch pads.
• TOUCH START
scrolbthrough
display.
Start
4. Touch START.
To set timer:
Stop
Clear
Timer
1. Touch STOP
CLEAR pad.
2. Touch TIMER pad.
ENTER TIME IN
MIN. AND SEC.
display.
3. Enter desired time
by using digit
touch pads.
o TOUCH START
Start
display.
4. Touch START.
To cancel timer
at any time,
press STOP
CLEAR pad.
ADD 30 SEC.
A time-saving pad, this simplified
control lets you quickly set and start
microwave cooking without the need
to touch START.
NOTE: if you touch Add 30 Sec., it
wiii add 30 seconds up to 9 minutes
59 seconds.
Exampte: To set for 2 minutes.
Add
Touch Add 30 See.
30 Sec, 4 times. The oven
begins cooking and
display shows time
counting down.
CHILD LOCK
This safety feature prevents unwant-
ed oven operation. Once the child
lock is set, no cooking can take
place. The Child Lock feature is also
useful when cleaning the control
panel. Child Lock prevents accidental
programming when wiping the con-
trol panel.
if the CHILD LOCK is set and you
touch another cooking pad, the word
LOCKED shows in the display.
Cancel the child lock according to the
procedure below.
To set the child tack:
Stop
1. Touch STOP
Clear CLEAR.
0 2. Touch and hold 0
pad until the word
LOCKED
appears in the
display and two
beeps are heard.
To cancel the childlock:
0
Touch and hold 0
pad until the word
LOCKED
disappears in the
display.
After the CHILD LOCK is turned off,
the oven wiii operate normally.
CUSTOM PROGRAM
CUSTOM PROGRAM lets you recall
one cooking instruction previously
placed in memory and begin cooking
ExampJe: To cook for 2 minutes at
60% power,
Custom 1. Touch CUSTOM
Program PROGRAM.
Dbplay scrolb
the words
TOUCH START
OR ENTER NEW
TIME
2. Enter cooking
time. Display
scrolls TOUCH
START OR
POWER,
Power
3. Touch POWER
Level LEVEL. Display
scrolls ENTER
POWER LEVEL
1 TO 10.
4. Enter power level
6. Display scrolls
P60 TOUCH
START.
Start 5. Touch START.
To recalJ the custom program:
Custom
1. Touch CUSTOM
Program PROGRAM.
Display scrolls
the words
TOUCH START
OR ENTER NEW
TIME.
Start
2. Touch START.
11