Related Manuals for Xiaomi MiJia
Summary of Contents for Xiaomi MiJia
- Page 2 Thank you for choosing «MiJia» robot cleaner. «MiJia» robot cleaner - the clever device, which plans a route of cleaning, it is equipped with highly sensitive optical laser and ultrasonic sensors, measuring a distance, and in real- time can build a plan of a room; using space sensors, scanning cleaning route, so cleaning is performed a complete, comprehensive, high-performance.
- Page 3 Overview Main device Dust collector Charging base Reset button Identification zone Clamp Cable housing Filter grid Dust collector cover Power cable Dust collector socket clamp Indicator light Wi-Fi Slow flashing: Standby Cable outlet Charging contacts connection; Attention! The cable can be Back cover Fast flashing: there is a removed, both right and left.
- Page 4 Usage 1. Connect power cable. Excess of cable is pulled into the Colour of ring indicator lamp shows an amount of electric charge: housing trough. White - 50%; Yellow - 50% -20%; Attention! Power cord, hanging down on the floor, can be Red - less than 20%.
- Page 5 Usage On/Off Cleaning algorithm Long press O button and the device is turned on, indicating ring lamp lights up and the After starting a cleaning, the device performs its intellectual scheme of scanning, along the walls, dividing the space into zones, building zones of cleaning route as Latin letter Z. cleaner listens for commands.
- Page 6 Pause Partial cleaning While the device is in standby or pause, long press «Home» button, a partial cleaning During a movement of device, press any button. automatically begins; its algorithm is cleaning zone 1,5 m x 1,5 m around the device, When you click O button, cleaning continues.
- Page 7 Planning of cleaning Virtual barrier This is a non-standard addition, can be purchased at www.mi.com Using the mobile app, you can schedule cleaning for some time, and the unit will automatically start cleaning at a selected time, and after automatically return to Virtual barrier can be used to limit the location of undesirable areas for the device, for base to recharge.
- Page 8 Charging base Daily care Base for recharging should be placed on a flat surface, leaning to wall, Main brush. Weekly cleaning recommended providing each side of not less than 0.5 m, and in front of at least 1.0 m of free space, and attached to a power outlet.
- Page 9 Daily care 2. Open the front cover of the dust container A method of cleaning the main brush with supplied tool. Dust collector and filter grid 3. Empty trash from the dust collector It is recommended to clean weekly. 1. Lift a top cover of the device, press a latch and pull a dust collector.
- Page 10 The side brush should be cleaned monthly Filter grid can not be washed with water, otherwise it becomes clogged with dust, and it will affect a cleaning efficiency. Attention! It is recommended to be changed filter grid every 3 months to ensure 1.
- Page 11 Turning wheel; «360 degrees» Sensors of the device recommended to clean daily recommended to clean monthly 1. Turn off the device and remove turning wheel; Use a clean cloth to clean all sensors of the cleaner, including: 2. Clean a wheel and its bearings from hair and sticky substances; 3.
- Page 12 Charging base recommended to clean monthly Use a clean cloth to clean contacts. Software update Use an mobile app to update the device’s software, before update, make sure that charge is at least 20%. When you update a software, ring indicator light quickly flashes white. System reset If there is no response on pressing buttons or inability to turn off the device, please try to reboot the system by pressing a system reset button (see.
- Page 13 Troubleshooting In the event of emergency situations, a ring indicator light flashes red rapidly and you will hear a voice message. In this case, please review contents of the table and fix a problem. System reset should solve some problems...
- Page 14 Information about dangers of laser light: Laser distance measurement sensor on this unit complies with IEC 60825-1: 2014 Product type 1, and causes no harmful laser radiation. Executive Standard: GB 4706.1-2005, GB 4706.7-2005, GB 4343.1-2009, GB17625.1-2012, Q / BJSTS0001-2016, Q / BJSTS0002-2016 The list of possible malfunctions of the robot cleaner «MiJia» XIAOMI-MI.COM...
Need help?
Do you have a question about the MiJia and is the answer not in the manual?
Questions and answers