Menu Operations - Panasonic AGHPG10 - MEMORY CARD PORTABLE RECORDER Operating Instructions Manual

Menu operations

This unit is provided with three kinds of screens: the thumbnail display screen, thumbnail display off screen
(1394 input standby mode, playback standby mode) and PC mode screen. When [MENU] is pressed on
any of these screens, the menu will be displayed. (No menus are displayed in the USB DEVICE mode or
1394 DEVICE mode.)
Operations performed when the function buttons are pressed
This is used to move the menu
highlighting to the item on the left;
depending on the menu item, it is
used to change the value.
This is used to display
the menus. When it is
pressed while a menu is
displayed, the menu is
exited.
Example of a menu operation:
1
Press [MENU] to display the menu.
2
Press [STOP] and [PLAY] to move the menu
highlighting, and select the item.
This is used to move the menu highlighting to the item above;
depending on the menu item, it is used to change the value.
This is used to move the menu highlighting to
the item below; depending on the menu item, it
is used to change the value.
This is used to select items and
enter their values. When there is a
sub-menu, it is used to display the
sub-menu.
This is used to move the menu
highlighting to the item on the right;
depending on the menu item, it is
used to change the value.
AG -H PG
10
3
Press [STILL].
• If another menu has been displayed, repeat
steps 2 and 3.
• Depending on the item, the value is changed
using [STOP], [PLAY], [FF] and [REW].
• Depending on the item, a confirmation screen
will be displayed.
• Depending on the item, the original screen is
restored automatically.
4
Press [MENU] to exit the menu.
17