Sw Mode Screen - Panasonic AGHPG10 - MEMORY CARD PORTABLE RECORDER Operating Instructions Manual

List of setting menus (continued)

SW MODE screen

Item
USER1
USER2
USER3
74
This is used to set which function is to be assigned to the USER1 button.
SYS FORMAT:
System format (page 72)
SD MODE :
SD mode (page 72)
SHOT MARK :
A shot mark is recorded on the clip. (Page 39)
TEXT MEMO :
A text memo is recorded. (Page 38)
LCD BL :
LCD backlight (page 76)
V OUT OSD :
Video output on-screen display (page 76)
AUDIO OUT :
Audio output (page 75)
SLOT SEL :
P2 card slot selection (page 49)
LCD RVS :
LCD reverse (page 76)
WFM :
Waveform monitor (page 49)
This is used to set which function is to be assigned to the USER2 button.
The settings of this item are the same as the USER1 item settings.
SHOT MARK
This is used to set which function is to be assigned to the USER3 button.
The settings of this item are the same as the USER1 item settings.
TEXT MEMO
Description of settings
The underlined settings are the factory mode settings.