Panasonic AGHPG10 - MEMORY CARD PORTABLE RECORDER Operating Instructions Manual page 47

This is used to set the format of the D connector output and HD/SD-SDI output signals.
CMPNT/SDI SEL :
(When SYSTEM AUTO
FREQ is set to 59.94
1080i
Hz)
480i
(When SYSTEM AUTO
FREQ is set to 50 Hz)
1080i
576i
ON
SDI OUT
OFF
ON
SDI METADATA
OFF
ON
SDI EDH
OFF
This is used to set the setup level for NTSC output during down-conversion.
SET UP
• This item is not displayed on the menu when SYS TEM FREQ is set to 59.94 Hz.
0%
7.5%A
The HD/SD-SDI output signals comply with the following standards.
HD : SMPTE 292M, 296M, 299M
SD : SD: SMPTE259M-C (480/59.94i), ITU-R BT. 656-4 (576/50i)
Signals are output in the format in which they were recorded.
720p signals are cross-converted to 1080i signals, and output.
480i format signals are output; 720p/1080i signals are down-converted to 480i
and output.
Signals are output in the format in which they were recorded.
720p signals are cross-converted to 1080i signals, and output.
576i format signals are output; 720p/1080i signals are down-converted to 576i
and output.
SDI signals are output.
SDI signals are not output.
The meta-data is superimposed onto the HD-SDI signals.
The meta-data is not superimposed onto the HD-SDI signals.
EDH is superimposed onto the SD-SDI signals.
EDH is not superimposed onto the SD-SDI signals.
47