Connecting Antenna - Onkyo HT-S770 Instruction Manual

Owner manual
Hide thumbs Also See for HT-S770:
Table of Contents

Advertisement

Connecting Antenna

Connecting Antenna
This chapter explains how to connect the supplied indoor
FM antenna and AM loop antenna and how to connect
commercially available outdoor FM and AM antennas.
The HT-R520 won't pick up any radio signals without
any antenna connected, so you must connect the antenna
to use the tuner.
AM antenna push terminals
FM antenna socket
COMPONENT VIDEO
ANTENNA
VIDEO 1 / 2 / 3
DVD IN
OUT
FM
AM
IN
75
Y
P
B
VIDEO 2
VIDEO 1
DVD
MONITOR
P
R
OUT
IN
OUT
IN
IN
REMOTE
DIGITAL IN
CONTROL
VIDEO
OPTICAL
COAXIAL
3
2
1
S VIDEO
IN
OUT
IN
IN
IN
OUT
IN
FRONT
SURR
CENTER
L
L
L
SUBWOOFER
PRE OUT
R
R
R
SUB
CD
TAPE
VIDEO 2
VIDEO 1
WOOFER
DVD
Connecting the Indoor FM Antenna
The supplied indoor FM antenna is for indoor use only.
1
Attach the FM antenna, as shown.
FM
75
Insert the plug fully
into the socket.
Once the HT-R520 is ready for use, you'll need to
tune into an FM radio station and adjust the posi-
tion of the FM antenna to achieve the best possi-
ble reception.
2
Use thumbtacks or something similar to
fix the FM antenna into position.
Caution: Be careful that you don't injure yourself
when using thumbtacks.
If you cannot achieve good reception with the supplied
indoor FM antenna, try a commercially available out-
door FM antenna instead (see page 19).
18
Class 2 Wiring
AC OUTLET
FRONT
FRONT
SURROUND
CENTER
AC 120 V
60 Hz
SPEAKERS B
SPEAKERS A
SPEAKERS
SPEAKER
SWITCHED
120 W 1 A MAX.
L
L
L
R
R
R
SURROUND BACK
SPEAKER
AV RECEIVER
Thumbtacks, etc.
Connecting the AM Loop Antenna
The supplied indoor AM loop antenna is for indoor use
only.
1
Assemble the AM loop antenna, inserting
the tabs into the base, as shown.
2
Connect both wires of the AM loop
antenna to the AM push terminals, as
shown.
(The antenna's wires are not polarity sensitive, so
they can be connected either way around.)
Make sure that the wires are attached securely and
that the push terminals are gripping the bare
wires, not the insulation.
Push
Insert wire
Once the HT-R520 is ready for use, you'll need to
tune into an AM radio station and adjust the posi-
tion of the AM antenna to achieve the best possi-
ble reception.
Keep the antenna as far away as possible from the
HT-R520, TV, speaker cables, and power cords.
If you cannot achieve good reception with the supplied
indoor AM loop antenna, try using it with a commer-
cially available outdoor AM antenna (see page 19).
Release
AM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht-r520

Table of Contents