Using The Tuner; Listening To The Radio - Onkyo HT-S770 Instruction Manual

Using the Tuner

With the built-in tuner you can enjoy AM and FM radio
stations. You can store your favorite stations as presets
for quick selection.
DISPLAY
STANDBY/ON
STANDBY
LISTENING
A SPEAKERS B TONE STEREO MODE
PHONES
MULTI CH DVD VIDEO 1 VIDEO
VCR
MEMORY

Listening to the Radio

1 Use the [TUNER] input selector
TUNER
button to select either AM or FM.
In this example, FM has been selected.
Band
34
MASTER VOLUME
PRESET
TUNING
MASTER VOLUME
TUNING
ENTER PRESET
SETUP RETURN
DISPLAY DIGITAL INPUT MEMORY TUNING MODE
CLEAR
VIDEO 3 INPUT
2 VIDEO 3 TAPE TUNER C D S VIDEO VIDEO L AUDIO R
TUNER
TUNING MODE
Frequency
Tuning into Radio Stations
■ Auto Tuning Mode
1
Press the [TUNING MODE] button
so that the AUTO indicator
MEMORY TUNING MODE
appears on the display.
CLEAR
2
Press the TUNING Up or Down
TUNING
[ ]/[ ] button.
Searching stops when a station is
found.
When tuned into an FM station, the TUNED and FM
STEREO indicators appear on the display, as shown.
When tuned into an AM station, the TUNED indicator
appears.
■ Manual Tuning Mode
1
Press the [TUNING MODE] button
so that the AUTO indicator disap-
MEMORY TUNING MODE
pears from the display.
CLEAR
2
Press and hold the TUNING Up or
TUNING
Down [ ]/[ ] button.
The frequency stops changing when
you release the button.
Press the buttons repeatedly to change
the frequency one step at a time.
HT-R520 changes FM frequency in 0.1 MHz steps,
10 kHz steps for AM.
In Manual Tuning mode, FM stations will be in mono.
Switch back to Auto Tuning mode for stereo.
Tuning into weak FM stations
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to
Manual Tuning mode and listen to the station in mono.
TUNED AUTO
FM STEREO