Download Print this page
Harvia Pro D IP65 Supplement Note
Harvia Pro D IP65 Supplement Note

Harvia Pro D IP65 Supplement Note

Sauna control unit
Hide thumbs Also See for Pro D IP65:

Advertisement

Quick Links

Sauna control unit
Pro D IP65
PRO-IP-D2 / PRO-IP-D2I / PRO-IP-D3 / PRO-IP-D3I
The description of installation and use of the components can be found in the
enclosed product manual „Sauna control unit Pro D".
For the function you always need a power unit, a heater sensor and a control
unit (control unit is not included).
Point „4.1. Installing the power unit" and „5. Electrical connection" of
the product manual „Sauna control unit Pro D" is replaced by the inst-
ructions on the following pages.
It´s important to install an external main switch and an external light
switch (see page 3)
ATTATION!
Damage to the unit
The sauna control unit is protected against water jets, if after the connection
work the screw caps of the cable glands are screwed tight and checked for leaks.
● Also observe „3. Technical data ProD-IP65" on page 3.
Version 07/24
SUPPLEMENT NOTE
for product manual
„Pro D"
Ident-Nr. 1-051-178
EN
DE
FR
IT
NL
SV
FI

Advertisement

loading
Need help?

Need help?

Do you have a question about the Pro D IP65 and is the answer not in the manual?

Questions and answers

Summary of Contents for Harvia Pro D IP65

  • Page 1 „Pro D“ Sauna control unit Pro D IP65 PRO-IP-D2 / PRO-IP-D2I / PRO-IP-D3 / PRO-IP-D3I The description of installation and use of the components can be found in the enclosed product manual „Sauna control unit Pro D“.
  • Page 2: Electrical Connection

    Instructions for installation and use p. 2/3 1. Installing the power supply unit Pro D IP65 Perform the following steps to assembly the power unit: 1. Open the casing by loosening the screw connection of the lid. 2. Remove the lid of the Wave.com4 power unit.
  • Page 3 Instructions for installation and use p. 3/3 2.1. Connecting external main switch The main switch is not included. 1. Feed the cable for the main switch through the cable gland into the connection area for 230 V/400 V 2. Connect the cable with the wires of the clamps , by cutting the wire bridge.
  • Page 4 NOTES / NOTIZEN / NOTE ………………………………………………….....………………………………………………………………... ……………………………………………………………..……………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………….....………………………………………………………………... ……………………………………………………………..……………………………………………………………... ……………………………………………………………..……………………………………………………………... ……………………………………………………………..…………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………..…………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………...
  • Page 5 NOTES / NOTIZEN / NOTE ………………………………………………….....………………………………………………………………... ……………………………………………………………..……………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………….....………………………………………………………………... ……………………………………………………………..……………………………………………………………... ……………………………………………………………..……………………………………………………………... ……………………………………………………………..…………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………..…………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………... …………………………………………………………….....………………………………………………………...
  • Page 6 GLOBAL: Harvia Finland Oy I P.O. Box 12 I Teollisuustie 1-7 I 40951 Muurame I FINLAND I +358 207 464 000 I harvia@harvia.fi CENTRAL EUROPE: Harvia Austria GmbH | Wartenburger Straße 31 I A-4840 Vöcklabruck I +43 (0) 7672/22900-50 | info@harvia.com...

This manual is also suitable for:

Pro-ip-d2Pro-ip-d2iPro-ip-d3Pro-ip-d3i