THANK YOU LETTER Thank you for choosing Midea! Before using your new Midea product, please read this manual thoroughly in order to operate your new appliance properly and safely. CONTENTS THANK YOU LETTER SAFETY INSTRUCTIONS SPECIFICATIONS PRODUCT INSTALLATION Component name...
SAFETY INSTRUCTIONS Intended use The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. Please check the packaging and appliance on arrival to make sure everything is intact to ensure safe operation. If you find any damage, please contact the retailer or dealer.
Page 4
Caution Read Rules for Safe Operation and Instructions carefully. ● This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Page 5
Warning If the supply cord is damaged, it must be replaced by ● manufacturer or its service agent or a similarly quali- fied person in order to avoid a hazard. To protect against the risk of electrical shock, do not ●...
PRODUCT INSTALLATION Component name Motor Motor shaft Rear grill Oscillation Speed cord cord Plastic Blade Spinner Front grill Circlip NOTE All the pictures in this manual are for explanation purpose only. Any discrepancy between the real object and the illustration in the drawing shall be subject to the real subject.
Installation procedures 1 Unscrew the spinner clockwise (or take the spinner out from the bag) and the plastic nut counterclockwise to remove both of them. Fix the rear grill to the motor then tighten the plastic nut again. (Fig. 1) Spinner Tight Loose Plastic nut...
Page 9
4 Mounting no the wall Secure the supplied bracket (A) on the wall by using wooden screw or plastic screw, make sure the wider opening should be upward, insert the hook of the wall fan into the bracket slot. 5 Speed adjustment Switch on/off the fan and Adjust to the desired speed by pulling the switch cord (B).
CLEANING AND MAINTENANCE The fan requires minimal maintenance. Do not try to fix it by yourself. Refer it to qualified service personnel if service is needed. 1. Before cleaning and assembling, unplug the fan power. 2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust.
TROUBLESHOOTING Operation of your appliance can lead to errors and malfunctions. The following tables contain possible causes and notes for resolving an error message or malfunction. It is recommended to read the table below carefully in order to save your time and money that may cost for calling to the service center.
DISPOSAL AND RECYCLING INFO Important instructions for environment Compliance with the WEEE Directive and Disposing of the Waster Product: This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waster electrical and electronic equipment (WEEE). This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life.
Midea may constitute trademark infringement or unfair competition in violation of relevant laws. This manual is created by Midea and Midea reserves all copyrights thereof. No entity or individual may use, duplicate, modify, distribute in whole or in part this manual, or bundle or sell with other products without the prior written consent of Midea.
European Economic Area. Further information are provided on request. You can contact our Data Protection Officer via MideaDPO@midea.com. To exercise your rights such as right to object your personal date being processed for direct marketing purposes, please contact us via MideaDPO@midea.com.
Need help?
Do you have a question about the FW40-7J and is the answer not in the manual?
Questions and answers