Advertisement
Quick Links
VC-1 Series Dedicated Rack-m
VC-1 Series Dedicated Rack-mount Tray
Contents of the Package
Contents of the Package
4
3
1
No.
Part name
1
Rack mount tray
1
2
Screw set
3
This document
4
Cable tie (Sample)
201_edit
Before using this unit, carefully read the sections entitled "USING
THE UNIT SAFELY" and "IMPORTANT NOTES."
The example shown is merely for reference, and may di er from
actual situations.
Speci cations
Roland RAD-3: Rack Mount Tray
Compatible
VC-1-SH, VC-1-HS, VC-1-DL, VC-1-SC
Models
Material
Steel
482 (W) x 380 (D) x 44 (H) mm
Dimensions
19 (W) x 15 (D) x 1-3/4 (H) inches
EIA-compliant 1U rack
2.4 kg
Weight
5 lbs 5 oz
2.4 kg
Weight
Capacity
5 lbs 5 oz
Owner's manual
Accessories
Cable tie x 3
Screw set (Flat head screw M3 x 6 10 pieces)
* In the interest of product improvement, the speci cations and/
or appearance of this unit are subject to change without prior
No.
notice.
1
2
3
4
Copyright © 2014 ROLAND CORPORATION
202
201_edit
RAD-3
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
Before using this unit, carefully read the sections entitled "USING
THE UNIT SAFELY" and "IMPORTANT NOTES."
The example shown is merely for reference, and may di er from
actual situations.
Speci cations
Roland RAD-3: Rack Mount Tray
Compatible
Models
Material
Dimensions
Weight
Weight
Capacity
Accessories
* In the interest of product improvement, the speci cations and/
or appearance of this unit are subject to change without prior
notice.
2
4
3
Quantity
1
1
1
3
Part name
Rack mount tray
Screw set
This document
Cable tie (Sample)
VC-1-SH, VC-1-HS, VC-1-DL, VC-1-SC
Steel
482 (W) x 380 (D) x 44 (H) mm
19 (W) x 15 (D) x 1-3/4 (H) inches
EIA-compliant 1U rack
2.4 kg
5 lbs 5 oz
2.4 kg
5 lbs 5 oz
Owner's manual
Cable tie x 3
Screw set (Flat head screw M3 x 6 10 pieces)
Installation
1.
Remove the screws at the locations on the VC-1 in the
gure (2 locations on either the top or underside),
according to how the unit is to be used.
2.
Using the screws included with the RAD-3, securely
fasten the VC-1 and the tray.
Use the included screws.
2
1
2
is for use with the unit installed ush against the front panel.
2
is for use with the unit installed 40 mm inward from the front
1
panel.
3.
Secure the AC adapter in place using the included cable ties.
Quantity
1
1
Up to three VC-1 series units can be mounted in this product at the
1
same time.
Ten screws, including spares, are packed with the product.
3
2
1
Advertisement
Related Manuals for Roland VC-1 Series
Summary of Contents for Roland VC-1 Series
- Page 1 Copyright © 2014 ROLAND CORPORATION 201_edit RAD-3 All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. Before using this unit, carefully read the sections entitled “USING THE UNIT SAFELY” and “IMPORTANT NOTES.”...
- Page 2 40 mm inward from the front panel. Secure the AC adapter in place using the included cable ties. Up to three VC-1 series units can be mounted in this product at the same time. Ten screws, including spares, are packed with the product.
- Page 3 Do not repair or replace parts by yourself Refer all servicing to your retailer, the Keep small items out of the reach of children nearest Roland Service Center, or an To prevent accidental ingestion of the authorized Roland distributor, as listed on parts listed below, always keep them out the “Information.”...
- Page 4 IMPORTANT NOTES • For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to wipe the unit thoroughly with a soft, dry cloth.
Need help?
Do you have a question about the VC-1 Series and is the answer not in the manual?
Questions and answers