Advertisement
Quick Links
Go to www.vtechphones.com
to register your product for
enhanced warranty support and
the latest VTech product news.
on purchasing your new VTech product. Before using this product, please read Important safety
instructions.
This manual has all the feature operations and troubleshooting necessary to install and operate
your new VTech product. Please review this manual thoroughly to ensure proper installation and
operation of this innovative and feature-rich VTech product.
For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com.
What's in the box
Congratulations
Full Color Video Monitor
with Wide-angle Lens
User's manual
1 set for VM4261
2 sets for VM4261-2
VM4261
VM4261-2
Advertisement
Related Manuals for VTech VM4261
Summary of Contents for VTech VM4261
- Page 1 Wide-angle Lens User’s manual Congratulations on purchasing your new VTech product. Before using this product, please read Important safety instructions. This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech product. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature-rich VTech product.
- Page 2 Connect and charge the battery Install the parent unit battery The parent unit runs on rechargeable battery or AC power. To continuously monitor your baby, keep the parent unit connected to AC power. With the battery alone, the parent unit can cordlessly run for a short time only.
-
Page 3: Before Use
Before use Note • This baby monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not be used as such. Test your baby monitor You may test the baby monitor before initial use, and at regular times thereafter. Caution •... -
Page 4: Operating Range
Operating range Operating range The operating range of the baby monitor is up to 1000 feet (300 meters) outdoors. The The operating range of the baby monitor is up to 1000 feet (300 meters) outdoors. The actual operating range may vary depending on the environmental conditions and other actual operating range may vary depending on the environmental conditions and other interferences such as walls, doors and other obstructions. -
Page 5: Set The Language
4. Press to choose a lullaby, or choose Play All, then press SELECT. • If Play All is selected, the five lullabies will be played one after the other, until all of them are played. 5. When the desired lullaby is selected, press to choose Play, then press SELECT. - Page 6 After 10 minutes of inactivity, it will dim again. Monitoring mode for VM4261-2 only Every time the parent unit is turned on, it displays a baby unit in Single CAM mode. If there are two baby units in your system, you can also monitor your baby in Patrol or Split mode.
-
Page 7: Adjust The Sound Sensitivity Of The Baby Unit
Adjust the sound sensitivity of the baby unit You can choose to hear sounds from the baby unit all the time, or to hear sounds that exceed a certain level. You can use the parent unit to adjust the microphone sensitivity of your baby unit. -
Page 8: Monitor The Temperature
Talk You can use the TALK function of the parent unit to comfort your baby in Single CAM and Patrol mode. 1. Press and hold TALK on the parent unit. The TALK light turns on. 2. Speak towards the microphone on the parent unit. Your voice is broadcast to the baby unit. 3. - Page 9 1. Press MENU when the parent unit is idle. 2. Press to choose Temperature, then press SELECT. 3. Press to choose Minimum or Maximum, then press SELECT. • If you have two baby units, the system prompts you to choose the desired baby unit or both baby units, press to choose ALL CAM or CAM #, then press SELECT.
-
Page 10: Baby Unit Overview
Baby unit overview Antenna Camera Temperature sensor Infrared LEDs ON/OFF switch Microphone • Slide to turn on or off the baby unit. Speaker ON/OFF LED light Power jack • On when the baby unit is turned on Threaded socket and is paired to the parent unit. •... -
Page 11: Parent Unit Lights
Single CAM or Patrol • While in a menu, press to choose an mode. item, or save a setting. • For VM4261-2 only PATROL • While in a menu, press to scroll up. • Press to turn on or off the Patrol •... -
Page 12: Status Icons
• Displays the baby unit number of the selected baby unit when in Split mode. Patrol mode • Displays when the parent unit is in Patrol mode. • For VM4261-2 only. Split mode • Displays when the parent unit is in Split mode. -
Page 13: Main Menu Icons
Main menu icons Alert Tone You can set the parent unit to beep • when the parent unit operates in low battery condition; • when the link between the parent unit and the baby unit is lost; or • when the baby unit detects sounds while in Split mode. •... -
Page 14: Night Vision
Temperature too high at CAM # The temperature detected by the baby unit is higher/lower than the desired temperature alert range. Temperature too low at CAM # The parent unit is turning on. Powering on... The parent unit is searching for baby units. The timer that determines the remaining play time for the lullabies Auto Timer of lullaby is is restarted. -
Page 15: Frequently Asked Questions
• DO NOT expose it to direct sunlight or moisture. • Avoid dropping the product or treating it roughly. • Clean with a soft cloth. • DO NOT immerse the parent unit and the baby unit in water and do not clean them under the tap. •... -
Page 16: Important Safety Instructions
Why can’t I establish a The baby units may be out of range. Move the parent unit closer to the baby units (but not connection? Why is the less than 3 feet). connection lost every now Other electronic and wireless products may cause interference with your baby monitor. Try and then? Why are there installing your baby monitor as far away from these devices as possible. -
Page 17: Fcc And Ic Regulations
• when the link between the parent unit and the baby unit is lost; or This VTech product complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to • when the baby unit detects sounds while in Split mode. -
Page 18: Limited Warranty
Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity. -
Page 19: Technical Specifications
Commons license. The Heart Beat sound file was created by Zarabadeu, and is used under the Creative Commons license. Specifications are subject to change without notice. © 2019 VTech Communications, Inc. All rights reserved. 03/19. VM4261-X_CIB_V5 Document order number: 91-010865-050-100...
Need help?
Do you have a question about the VM4261 and is the answer not in the manual?
Questions and answers