Frymaster FilterQuick Quick Reference

FilterQuick
Exit Menus, Scan
programmed
Pressed Individually:
Scroll menu, program-
ming options.
Pressed Simultane-
ously: Launches
Polish.
Exit Menus, Scan
programmed
ON/OFF
Left Side Product Buttons: 1-5 and 11-15
are products for left side display.
ON/OFF
ON/OFF

Press ON/OFF button. Fryer enters melt cy-
cle before switching to full temperature and
heating to setpoint.

Exit melt cycle by pressing and releasing the

Press ON/OFF button. Fryer enters melt cy-
Exit Cool button or any programmed product
button. Displays show Exit Melt? on left and
YES NO on the right. Press  to exit.
cle before switching to full temperature and
Cooking

COOL displayed: Press product button or
Exit Cool button; fryer heats to setpoint and heating to setpoint.
displays READY.
Press product button and drop product.
 
- - - - displayed: The vat temperature is out
Exit melt cycle by pressing and releasing the
of the READY zone.

READY displayed: Press product button and
drop product.
Exit Cool button or any programmed product

SHAKE displayed: If shake is needed, alarm
sounds. Press blinking product button to can-
cel alarm.
button. Displays show Exit Melt? on left and

DONE displayed: Press product button to
YES NO on the right. Press  to exit.
Cooking

COOL displayed: Press product button or
Exit Cool button; fryer heats to setpoint and
displays READY.
Press product button and drop product.

- - - - displayed: The vat temperature is out
of the READY zone.

READY displayed: Press product button and
drop product.

SHAKE displayed: If shake is needed, alarm
sounds. Press blinking product button to can-
cel alarm.

DONE displayed: Press product button to
: Quick Reference
™
Exits/Enters COOL MODE.
Left Side Product Buttons: 1-
are products for left side display
cancel alarm.

HOLD displayed: Press blinking product
button to cancel hold alarm.

Cancel Cook Cycle: Press and hold product
button.
Controller Button Navigation

Product: Press to start cook cycle. Press at
end of cook cycle to stop alarm.

Exit/Scan: Press once, all programmed
product buttons are lit; Select Product dis-
played. Press product button to view product
name. Press right arrow to view parameters.
Press Exit/Scan again to repeat. Press Exit/
Scan twice to escape.

Left/Right Arrows (): Navigate options
in left display. Press and hold simultaneously
to launch Polish cycle.

Up/Down Arrows (): Navigate options in
right display. Press and hold simultaneously
to change language if programmed.

Exit Cool: Press to enter/exit Cool Mode.
Access programming, re-
spond to left-display prompts
and check recovery.
Check actual,
setpoint tem-
Access Filter Menu
peratures and
software ver-
sions.
ON/OFF
Product Button LED: Lit when
product is cooking or holding.
Pressed Individually: Scroll
menu, programming options.
Pressed Simultaneously:
Changes to 2nd language if
programmed.
ON/OFF
Right Side Product Buttons: 6-10 and
16-20 are products for right side display.

Thermometer (): Fryer ON: Press and
release for setpoint/left; vat temp/right.

Thermometer (): Fryer OFF: Press and
release to display temperature, time, date,
system version, FilterQuick version, circuit
board versions.

Checkmark( ): Fryer OFF: Press and re-

lease: Check recovery; Press and hold 3 sec-
onds: Scroll filter usage; Press and hold 10
seconds: Main Menu-Product setup

Checkmark( ): Fryer ON: Press and re-

lease: Check recovery; Press and hold 4 sec-
onds: Info Mode.

Filter: Press and hold: Filter options: FIL-
TER, CLEAN AND FILTER, DISPOSE,
DRAIN TO PAN, BOIL OUT or CLEAN, FILL
VAT FROM PAN, PAN TO WASTE (Bulk
only) and FILL VAT FROM BULK (Bulk only).

Filter: Press and release: Displays total per-
centage of products cooked and cooks re-
maining to filter cycle.
8197051 AUG 2015
Press product
buttons to start/
stop a cook and
acknowledge
shake alarm.
Press and hold
to stop a cook.