Upgrade From Directory Server 5.X To 6.X; General Server Configuration Attributes - Netscape DIRECTORY SERVER 6.1 Configuration Manual

Upgrade from Directory Server 5.x to 6.x

Upgrade from Directory Server 5.x to 6.x
In Directory Server 5.x and 6.x, the configuration information is stored in the same
way. This section explains which configuration attributes are automatically
migrated by the
which are not automatically migrated are either configured during the installation
process for the new Directory Server, or need to be configured manually for
security reasons after the initial set up.

General Server Configuration Attributes

Table 6-4 lists the configuration attributes stored in the
automatically migrated when you run the
Table 6-5 lists the configuration attributes store in the
automatically migrated when you run the
that are not automatically migrated are either configured during the installation
process for the new Directory Server, or need to be configured manually. The
reason for not migrating an attribute is stated in the table.
Table 6-4
nsslapd-accesscontrol
nsslapd-errorlog-logging-enabled
nsslapd-accesslog-logging-enabled
nsslapd-auditlog-logging-enabled
nsslapd-accesslog-level
nsslapd-accesslog-logbuffering
nsslapd-accesslog-logexpirationtime
nsslapd-accesslog-logexpirationtimeunit
nsslapd-accesslog-logmaxdiskspace
nsslapd-accesslog-logminfreediskspace
nsslapd-accesslog-logrotationtime
nsslapd-accesslog-logrotationtimeunit
nsslapd-accesslog-maxlogsize
nsslapd-accesslog-maxlogsperdir
210 Netscape Directory Server Configuration, Command, and File Reference • August 2002
migrateInstance6
Attributes in cn=config Automatically Migrated
script, and which ones are not. Attributes
cn=config
migrateInstance6
cn=config
migrateInstance6
entry that are
script.
entry that are not
script. Attributes