Default Value:
256
Syntax:
Integer
Example:
nsslapd-accesslog-level: 256
nsslapd-accesslog-list
This read-only attribute which cannot be set provides a list of access log files used
in access log rotation.
Entry DN:
cn=config
Valid Values:
N/A
Default Value:
None
Syntax:
DirectoryString
Example:
nsslapd-accesslog-list:accesslog2,accesslog3
nsslapd-accesslog-logbuffering (Log Buffering)
When set to
, the server writes all access log entries directly to disk.
off
Entry DN:
cn=config
Valid Values:
on | off
Default Value:
on
Syntax:
DirectoryString
Example:
nsslapd-accesslog-logbuffering: off
nsslapd-accesslog-logexpirationtime (Access Log Expiration Time)
Specifies the maximum age that a log file is allowed to reach before it is deleted.
This attribute supplies only the number of units. The units are provided by the
nsslapd-accesslog-logexpirationtimeunit
Entry DN:
cn=config
Valid Range:
1 to the maximum 32 bit integer value (2147483647)
Core Server Configuration Attributes Reference
attribute.
Chapter 2
Core Server Configuration Reference
39