Nsslapd-Auditlog-Logrotationtime (Audit Log Rotation Time); Nsslapd-Auditlog-Logrotationtimeunit (Audit Log Rotation Time Unit) - Netscape DIRECTORY SERVER 6.1 Configuration Manual

Entry DN:
cn=config
Valid Range: 0 through 59
Default Value: None (because nsslapd-auditlog-logrotationsync-enabled
is off)
Syntax: Integer
Example:
nsslapd-auditlog-logrotationsyncmin: 30

nsslapd-auditlog-logrotationtime (Audit Log Rotation Time)

Specifies the time between audit log file rotations. The audit log will be rotated
when this time interval is up, regardless of the current size of the audit log. This
attribute supplies only the number of units. The units (day, week, month, and so
forth) are given by the
set the
nsslapd-auditlog-maxlogsperdir
attribute.
Although it is not recommended for performance reasons to specify no log rotation
as the log will grow indefinitely, you have two ways of specifying this. Either you
set the
nsslapd-auditlog-maxlogsperdir
nsslapd-auditlog-logrotationtime
nsslapd-auditlog-maxlogsperdir
larger than 1, the server then checks the
attribute. See "nsslapd-auditlog-maxlogsperdir (Audit Log Maximum Number of
Log Files)," on page 52 for more information.
Entry DN:
cn=config
Valid Range: -1 | 1 to the maximum 32 bit integer value (2147483647) where a value
of -1 means that the time between audit log file rotation is unlimited.
Default Value:
1
Syntax: Integer
Example:
nsslapd-auditlog-logrotationtime: 100

nsslapd-auditlog-logrotationtimeunit (Audit Log Rotation Time Unit)

Specifies the units for the
nsslapd-auditlog-logrotationtimeunit
attribute to -1. The server checks the
attribute first and if this attribute value is
nsslapd-auditlog-logrotationtime
nsslapd-auditlog-logrotationtime
Chapter 2
Core Server Configuration Attributes Reference
attribute to 1, the server ignores this
attribute value to 1 or the
Core Server Configuration Reference
attribute. If you
attribute.
51