Nsslapd-Db-Verbose; Nsslapd-Dbncache - Netscape DIRECTORY SERVER 6.1 Configuration Manual

Entry DN:
cn=config,cn=ldbm database,cn=plugins,cn=config
Valid Range: 0 to 100
Default Value:
40
Syntax: Integer
Example:
nsslapd-db-trickle-percentage: 40

nsslapd-db-verbose

Specifies whether to record additional informational and debugging messagses
when searching the log for checkpoints, doing deadlock detection, and performing
recovery. Note that this parameter is meant for troubleshooting, and enabling the
parameter may slow down the Directory Server.
Entry DN:
cn=config,cn=ldbm database,cn=plugins,cn=config
Valid Values: on | off
Default Value:
off
Syntax: DirectoryString
Example:
nsslapd-db-verbose: off

nsslapd-dbncache

This attribute allows you to split the ldbm cache into equally sized separate pieces
of memory. It is possible to specify caches that are large enough so that they cannot
be allocated contiguously on some architectures, e.g., some releases of Solaris limit
the amount of memory that may be allocated contiguously by a process. If
is 0 or 1, the cache will be allocated contiguously in memory. If
nsslapd-dbncache
it is greater than 1, the cache will be broken up into ncache equally sized separate
pieces of memory.
This attribute is provided only for system modification/diagnostics and should be
changed only with the guidance of Netscape Technical Support or Netscape
Professional Services. Inconsistent settings of this attribute and other configuration
attributes may cause the Directory Server to be unstable.
Chapter 3 Plug-in Implemented Server Functionality Reference
Database Plug-in Attributes
157