Netscape DIRECTORY SERVER 6.02 - ADMINISTRATOR Administrator's Manual page 34

Configuring LDAP Parameters
• You need to change the configuration or user directory port or secure port
number configured for Netscape Administration Server. See Managing Servers
with Netscape Console for information.
• If you have other Netscape servers installed that point to the configuration or
user directory, you need to update those servers to point to the new port
number.
To modify the port or secure port on which either a user or a configuration
directory listens for incoming requests:
On the Directory Server Console, select the Configuration tab and then select
1.
the top entry in the navigation tree in the left pane.
Select the Settings tab in the right pane.
2.
Enter the port number you want the server to use for non-SSL communications
3.
in the "Port" text box.
The default value is 389.
Enter the port number you want the server to use for SSL communications in
4.
the Encrypted Port text box.
The encrypted port number that you specify must not be the same port number
as you are using for normal LDAP communications. The default value is 636.
Click Save and then restart the server.
5.
See "Starting and Stopping the Directory Server," on page 31 for information.
Placing the Entire Directory Server in Read-Only
Mode
If you maintain more than one database with your Directory Server and you need
to place all your databases in read-only mode, you can do this in a single operation.
Note, however, that if your Directory Server contains replicas, you must not use
read-only mode because it will disable replication.
To put the Directory Server in read-only mode:
On the Directory Server Console, select the Configuration tab and then select
1.
the top entry in the navigation tree in the left pane.
Select the Settings tab in the right pane.
2.
Select the Make Entire Server Read-Only checkbox.
3.
34 Netscape Directory Server Administrator's Guide • May 2002