Moving The Change Log To A New Location; Initializing Consumers; When To Initialize A Consumer - Netscape DIRECTORY SERVER 6.02 - ADMINISTRATOR Administrator's Manual

Moving the Change Log to a New Location

To delete the change log while the server is still running and continuing to log
changes, you simply move the change log to a new location. By moving the change
log, a new change log is created in the directory you specify, and the old change log
is deleted. If you change the location of the change log it is as if you are
reinitializing it, which in turn requires consumer reinitialization.
For example you could move the change log from the default location of
/usr/netscape/servers/slapd-serverID/changelogdb
/usr/netscape/severs/slapd-serverID/newchangelogdb

Initializing Consumers

Once you have created a replication agreement, you must initialize the consumer,
that is, you must physically copy data from the supplier server to the consumer
servers. This section first describes consumer initialization in detail, and then
provides instructions on the two different methods for initializing consumers. This
section is divided into the following parts:
•

When to Initialize a Consumer

• Online Consumer Initialization Using the Console
• Manual Consumer Initialization Using the Command Line
When to Initialize a Consumer
Consumer initialization involves copying data from the supplier server to the
consumer server. Once the subtree has been physically placed on the consumer, the
supplier server can begin replaying update operations to the consumer server.
Under normal operations, the consumer should not ever have to be initialized
again. However, if the data on the supplier server is restored from backup for any
reason, then you should reinitialize all of the consumers supplied by it.
You can either initialize the consumer online using the console or manually using
the command line. Online consumer initialization using the console is an effective
method of initializing a small number of consumers. However, since each replica is
initialized in sequence, this method is not suited to initializing a large number of
replicas. Online consumer initialization is the method used when you initialize the
consumer while configuring the replication agreement on the supplier server.
Initializing Consumers
to
.
Chapter 8 Managing Replication 309