Starting And Stopping The Directory Server; Figure 1-1 Viewing The Bind Dn - Netscape DIRECTORY SERVER 6.02 - ADMINISTRATOR Administrator's Manual

Changing Login Identity
You can log in with the Directory Manager DN when you first start the Netscape
Console. At any time, you can choose to log in as a different user, without having
to stop and restart the Console.
To change your login in Netscape Console:
On the Directory Server Console, select the Tasks tab.
1.
Click "Log on to the Directory Server as a New User."
2.
A login dialog box appears.
Enter the new DN and password and click OK.
3.
Enter the full distinguished name of the entry with which you want to bind to
the server. For example, if you want to bind as the Directory Manager, then
enter the following in the Distinguished Name text box:
cn=Directory Manager
For more information about the Directory Manager DN and password, refer to
"Configuring the Directory Manager," on page 30.
Viewing the Current Bind DN From the Console
You can view the bind DN you used to log in to the Directory Server Console by
clicking the login icon in the lower-left corner of the display. The current bind DN
appears next to the login icon as shown here:
Figure 1-1 Viewing the Bind DN

Starting and Stopping the Directory Server

If you are not using Secure Sockets Layer (SSL), you can start and stop the
Directory Server using the methods listed here. If you are using SSL, see "Starting
the Server with SSL Enabled," on page 36.
Starting and Stopping the Directory Server
Chapter 1 Introduction to Netscape Directory Server 31