Nsslapd-Accesslog-Logging-Enabled (Access Log Enable Logging); Nsslapd-Accesslog-Logmaxdiskspace (Access Log Maximum Disk Space) - Netscape DIRECTORY SERVER 6.02 Configuration Manual

nsslapd-accesslog-logging-enabled (Access Log Enable Logging)

Disables and enables accesslog logging but only in conjunction with the
nsslapd-accesslog
to record each database access.
For access logging to be enabled this attribute must be switched to
nsslapd-accesslog
The table below lists the four possible combinations of values for these two
configuration attributes and their outcome in terms of disabling or enabling of
access logging.
Attributes in dse.ldif
nsslapd-accesslog-logging-enabled
nsslapd-accesslog
nsslapd-accesslog-logging-enabled
nsslapd-accesslog
nsslapd-accesslog-logging-enabled
nsslapd-accesslog
nsslapd-accesslog-logging-enabled
nsslapd-accesslog
Entry DN:
cn=config
Valid Range: on | off
Default Value:
on
Syntax: DirectoryString
Example:
nsslapd-accesslog-logging-enabled: off
nsslapd-accesslog-logmaxdiskspace (Access Log Maximum Disk
Space)
Specifies the maximum amount of disk space in megabytes that the access logs are
allowed to consume. If this value is exceeded, the oldest access log is deleted.
attribute that specifies the path and filename of the log used
configuration attribute must have a valid path and filename.
Value
on
empty string
on
filename
off
empty string
off
filename
Core Server Configuration Attributes Reference
Logging Enabled or Disabled
Disabled
Enabled
Disabled
Disabled
Chapter 2 Core Server Configuration Reference
and the
on
39