Nsslapd-Accesslog-Logminfreediskspace (Access Log Minimum Free Disk Space); Nsslapd-Accesslog-Logrotationtime (Access Log Rotation Time) - Netscape DIRECTORY SERVER 6.02 Configuration Manual

Core Server Configuration Attributes Reference
When setting a maximum disk space, consider the total number of log files that can
be created due to log file rotation. Also remember that there are 3 different log files
(access log, audit log, and error log) maintained by the Directory Server, each of
which will consume disk space. Compare these considerations to the total amount
of disk space that you want to be used by the access log.
Entry DN:
Valid Range:
Default Value:
Syntax:
Example:
nsslapd-accesslog-logminfreediskspace (Access Log Minimum Free
Disk Space)
Specifies the minimum allowed free disk space in megabytes. When the amount of
free disk space falls below the value specified on this attribute, the oldest access log
is deleted until enough disk space is freed to satisfy this attribute.
Entry DN:
Valid Range:
Default Value:
Syntax:
Example:

nsslapd-accesslog-logrotationtime (Access Log Rotation Time)

Specifies the time between access log file rotations. The access log will be rotated
when this time interval is up, regardless of the current size of the access log. This
attribute supplies only the number of units. The units (day, week, month, and so
forth) are given by the
Although it is not recommended for performance reasons to specify no log rotation
as the log will grow indefinitely, you have two ways of specifying this. Either you
set the
nsslapd-accesslog-logrotationtime
40 Netscape Directory Server Configuration, Command, and File Reference • May 2002
cn=config
-1 | 1 to the maximum 32 bit integer value (2147483647)
500 (A value of -1 means that the disk space allowed to the access log
is unlimited in size).
Integer
nsslapd-accesslog-logmaxdiskspace: 200
cn=config
1 to the maximum 32 bit integer value (2147483647)
5
Integer
nsslapd-accesslog-logminfreediskspace: 4
nsslapd-accesslog-logrotationtimeunit
nsslapd-accesslog-maxlogsperdir
attribute value to 1 or the
attribute to -1. The server checks the
attribute.